MEQUON, WI —
OSHA Inspection: CARLSON TOOL & MANUFACTURING CORP.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CARLSON TOOL & MANUFACTURING CORP. in 5545 WEST PIONEER ROAD, MEQUON, WI 53092 (NAICS 332999). OSHA activity number 339554909.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CARLSON TOOL & MANUFACTURING CORP.
- Site address
- 5545 WEST PIONEER ROAD
- City
- MEQUON
- State
- WI
- ZIP
- 53092
- Mailing
- W57 N14386 DOERR WAY, CEDARBURG, WI 53012
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 53
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C07 I
- Issued
- Apr 1, 2014
- Abate by
- Apr 18, 2014
- Penalty
- Initial $3,825 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: (a) In the East Plant, the employer did not ensure employees who participated in maintenance, servicing, and setup activities were provided effective energy control training at the authorized level.
Recent events (2)
- — I (S) $2500
- — Z (S) $3825
1910.147 F01 II
- Issued
- Apr 1, 2014
- Abate by
- Apr 8, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(f)(1)(ii): When lockout or tagout devices temporarily were removed from the energy isolating device and the machine or equipment was energized to test or position the machine, the employees were not removed from the machine or equipment area in accordance to the paragraph (e)(2): (a) On or about 1/21/2014 in the East Plant, the employer did not ensure employees performing setup work on the TechniDrill were removed from the pinch point hazard areas prior to setting the zero point with the drill.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 A04
- Issued
- Apr 1, 2014
- Abate by
- Apr 11, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: (a) In the East Plant, the employer did not ensure that a manufacturer's written approval was obtained prior to operating fork trucks with holes drilled in the forks.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 Q01
- Issued
- Apr 1, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel: (a) In the East Plant, the employer did not ensure the Nissan fork truck (N-50) was removed from service after being identified with a bent right-side fork tip.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1030 G02 I
- Issued
- Apr 1, 2014
- Abate by
- Apr 18, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1030(g)(2)(i): The employer did not ensure that each employee with occupational exposure participated in a training program: (a) On or about 1/21/2014 in the East Plant, the employer designated an employee to clean up blood after an industrial accident without providing training on bloodborne pathogens prior to the job assignment.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Carlson Tool & Manufacturing Corp.
View Carlson Tool & Manufacturing Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339554909.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.