OSHA Inspection: MALLIN INDUSTRIES, LLC

Issued

Apr 30, 2014

Abate by

Jun 4, 2014

Penalty

Initial $2,100 · Current $1,260 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  (a) On or about 01/22/2014 - Machine and Fabrication Shop, periodic inspections of the energy control procedures were not accomplished for employees engaged in the servicing and / or maintenance of equipment such as, but not limited to, the Okuna CNC milling machine, DoAll vertical band saws, Piranha ironworker, and multiple manufacturers of milling machines and lathes.

Issued

Apr 30, 2014

Abate by

May 12, 2014

Penalty

Initial $2,100 · Current $1,260 Reduced

General-duty citation text

29 CFR 1910.179(g)(1)(v): Pendant control box(es) were not clearly marked for identification of functions:  (a) On or about 01/22/2014 - Fabrication Shop, the pendant buttons of a Deshazo 25-ton crane used at the opposite end of the Fabrication Building were not marked for directional control functions.

Issued

Apr 30, 2014

Abate by

Jun 4, 2014

Penalty

Initial $2,800 · Current $1,680 Reduced

General-duty citation text

29 CFR 1910.179(j)(3): Complete inspections of the crane was not being performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section:  (a) On or about 01/22/2014 - Machine and Fabrication Shop, periodic inspections of overhead cranes had not been conducted since 08/27/2008.

Issued

Apr 30, 2014

Abate by

Jun 4, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.179(j)(2): All deficiencies such as listed were not being carefully examined and determination made as to whether they constitute a safety hazard:  (a) On or about 01/22/2014 - Machine and Fabrication Shop, overhead cranes were not frequently inspected and documented.

Issued

Apr 30, 2014

Abate by

May 12, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible:  (a) On or about 01/22/2014 - Fabrication Shop, employees who on occasion are tasked to paint finished products and voluntarily use company provided 3M, Model 6000 respirators with 3M 6001 filters were not provided a copy of Appendix D.

Issued

Apr 30, 2014

Abate by

Jun 4, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user:  (a) On or about 01/22/2014 - Fabrication Shop, employees who voluntarily wear company provided 3M, Model 6000 respirators with 3M 6001 filters had not been medically cleared to wear respirators.

Issued

Apr 30, 2014

Abate by

Jun 4, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(h)(3)(iv):  The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:  (a) On or about 01/22/2014 - Machine and Fabrication Shop, employees were not trained in the changes applicable to the new Hazard Communication Standard by December 01, 2013.