OSHA Inspection: QUES INDUSTRIES INC.

Issued

Jul 7, 2014

Abate by

Jul 25, 2014

Penalty

Initial $1,600 · Current $1,120 Reduced

General-duty citation text

29 CFR 1910.23(c)(1):  Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toe boards:      On the first day of the inspection a sliding gate was open on the second floor mezzanine.

Issued

Jul 7, 2014

Abate by

Jul 25, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(c)(1):  A written respiratory protection program that included the provisions in 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:    Employees were required to wear respirators when compounding products, or repackaging chemicals, and no written program was developed.

Issued

Jul 7, 2014

Abate by

Jul 25, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(e)(1):  The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:    Employees were required to wear respirators when compounding products, or repackaging chemicals, and no medical evaluation was provided.

Issued

Jul 7, 2014

Abate by

Jul 25, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(g)(1)(i)(A):  Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function:    Employees who were required to wear respirators when compounding products, or repackaging chemicals, had beards.

Issued

Jul 7, 2014

Abate by

Jul 25, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.157(g)(2):  The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage firefighting was not provided to all employees upon initial employment, and at least annually thereafter:    Although portable fire extinguishers were available for employee use, neither initial, nor annual retraining was provided.    Note:  Employer may exercise one of the following options.    1.  Provide portable fire extinguishers as specified in 29 CFR1910.157(c)(1), meet the distribution requirements per 29 CFR1910.157(d) (75 feet to the nearest extinguisher for Class A fires and 50 feet to the nearest unit for Class B fires), and provide training and education for all employees in the use of such equipment and the hazards associated with incipient stage firefighting as required in 29 CFR 1910.157(g). The other sections of 29 CFR also apply.    2.  Provide extinguishers as specified in 29 CFR 1910.157(c)(1),designate certain employees to be the only employees authorized to use such equipment and require all other employees to immediately evacuate upon the sounding of the fire alarm, establish this in writing in an emergency action plan as outlined in 29 CFR1910.38(a) and train/educate designated employees per 1910.157(g).Utilizing this option exempts the employer from distribution requirements of 29 CFR 1910.157(d).    3.  Establish a written fire safety policy which requires the immediate and total evacuation of employees from the workplace upon the sounding of a fire alarm signal.  This policy shall include an emergency action plan and a fire prevention plan as specified in 29CFR 1910.38(a) and (b).  Utilizing this option exempts the employer from the requirements of 29 CFR 1910.157 to include the need for providing portable fire equipment unless a specific standard requires that a portable fire extinguisher be provided (such as those requirements in 29 CFR 1910.106/107 related to use/storage of flammable/combustible liquids).  If extinguishers are provided, but not intended for employee use, 29 CFR 1910.157(e) and (f) are still applicable (inspection, maintenance, and testing of equipment).