IXONIA, WI —
OSHA Inspection: METALCRAFT TOOL & DIE INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of METALCRAFT TOOL & DIE INC. in N7842 WOODY LN, IXONIA, WI 53036 (NAICS 331210). OSHA activity number 339564130.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- METALCRAFT TOOL & DIE INC.
- Site address
- N7842 WOODY LN
- City
- IXONIA
- State
- WI
- ZIP
- 53036
- Mailing
- N7842 WOODY LN, IXONIA, WI 53036
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331210
- Employees
- 13
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 D01 III
- Issued
- Jun 17, 2014
- Abate by
- Sep 16, 2014
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminants chemical state and physical form: On or about January 28, 2014, the employer did not evaluate employees exposure to respiratory hazards while performing welding on mild steel and stainless steel.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.179 J01 II
- Issued
- Jun 17, 2014
- Abate by
- Jul 16, 2014
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.179(j)(1)(ii): The employer did not perform frequent and periodic inspections as defined in paragraphs (a) and (b) of this section: On or about January 28, 2014, the employer did not perform inspections on the Harrington crane.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.212 A01
- Issued
- Jun 17, 2014
- Abate by
- Jul 21, 2014
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about January 28, 2014, employee(s) operating the press brake were exposed to amputation hazards due to a lack of guarding at the point of operation. (b) On or about January 28, 2014, employee(s) passing behind the press brake were exposed to amputation hazards due to a lack of guarding.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.1200 E01
- Issued
- Jun 17, 2014
- Abate by
- Jul 16, 2014
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: On or about January 28, 2014, the employer did not develop and implement a written hazard communication program.
Recent events (2)
- — I (S) $0
- — Z (S) $2000
1910.1200 H01
- Issued
- Jun 17, 2014
- Abate by
- Jul 21, 2014
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: On or about January 28, 2014, employees were not provided training on the hazards of chemicals including, but not limited to: stainless steel, the hazards of which include respiratory irritation and cancer.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
More inspections at Metalcraft Tool & DIE INC.
View Metalcraft Tool & DIE INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331210)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339564130.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.