GIBSONTON, FL ·
OSHA Inspection: RAY SPENCER CARPENTRY & FRAMING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RAY SPENCER CARPENTRY & FRAMING, INC. in 113250 SOUTHWIND LAKE DR, GIBSONTON, FL 33534 (NAICS 238350). OSHA activity number 339565905.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RAY SPENCER CARPENTRY & FRAMING, INC.
- Site address
- 113250 SOUTHWIND LAKE DR
- City
- GIBSONTON
- State
- FL
- ZIP
- 33534
- Mailing
- 2846 WOODLAND MEADOW RD, MULBERRY, FL 33860
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238350
- Employees
- 3
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1926.501 B13
- Issued
- Feb 11, 2014
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a. At the site, employees were exposed to a 8 foot 9 inch fall, in that no fall protection was used while conducting sheething operations on a roof with a 5/12 pitch. On or about 01/29/14.
Recent events (2)
- · I (S) $1680
- · Z (S) $2800
1926.503 A01
- Issued
- Feb 11, 2014
- Abate by
- Mar 31, 2014
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a.. At the site, an employee working from a 8 foot 9 inch roof installing sheathing was not trained on the hazards associated with falls from heights. On or about 01/22/14.
Recent events (2)
- · I (S) $960
- · Z (S) $1600
1926.1053 B01
- Issued
- Feb 11, 2014
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladders length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigied support that will not deflect, and/or a grasping device was not provided to assist emmployees in mounting and dismounting the ladder. a At the site, employees were exposed to a 8 foot 9 inch fall, in that, the ladder being used to access the roof only extended 12 inches above the landing surface. On or about 01/29/2014
Recent events (2)
- · I (S) $960
- · Z (S) $1600
More inspections at RAY Spencer Carpentry & Framing, INC.
View RAY Spencer Carpentry & Framing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238350)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339565905.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.