Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CREATIVE WOODWORKING CONCEPTS INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of CREATIVE WOODWORKING CONCEPTS INC. in 904 RIVO PLACE, TARPON SPRINGS, FL 34689 (NAICS 321918). OSHA activity number 339567208.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Creative Woodworking Concepts INC. — free Get an email when a new federal OSHA severe-injury report for Creative Woodworking Concepts INC. is published. One employer, no account, unsubscribe in one click.
Site address
904 RIVO PLACE
City
TARPON SPRINGS
State
FL
ZIP
34689
Mailing
904 RIVO PLACE, TARPON SPRINGS, FL 34689
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321918
Employees
25
Ownership type
A

5 citations on file for this inspection.

1910.334 A01

Serious Gravity 5 1 instance 26 exposed
Issued
Apr 2, 2014
Abate by
Apr 21, 2014
Penalty
Initial $2,000 · Current $1,200 Reduced
29 CFR 1910.334(a)(1): Flexible electric cords were fastened with staples or otherwise hung in such a fashion as could damage the outer jacket or insulation:  (a) At employer facility, employees performing woodworking operations are exposed to fire hazards, in that, the drill press was powered by an extension cord, which was fastened to studs with permanent brackets, on or about 1/30/2014.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2000

1910.1200 E01

Other-than-serious 1 instance 5 exposed
Issued
Apr 2, 2014
Abate by
Apr 21, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  (a) At the site; employees performing woodworking tasks were exposed to health hazards from chemicals such as but not limited to the Chemcraft Varicure Satin.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.134 A02

Other-than-serious 1 instance 2 exposed
Issued
Apr 2, 2014
Abate by
Apr 21, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.134(a)(2): The employer did not establish and maintain a respiratory protection program which included the requirements outlined in 29 CFR 1910.134(c):  (a) At the site, the employer had not established a respiratory protection program for employees who had been provided tight fitting respirators.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.38 B

Other-than-serious 1 instance 26 exposed
Issued
Apr 2, 2014
Abate by
Apr 21, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.38(a): The emergency action plan required by 29 CFR1910.157(a) or (b) when the employer has elected to partially or totally evacuate the workplace in the event of a fire emergency, or required by 29 CFR1910.160(c)(1), did not cover the designated actions that the employer or employees must take to ensure employee safety from the fire and other emergencies:  a) At the site, the employer did not have a written emergency action plan when employees art to totally evacuate the workplace in the event of a fire or emergency, on or about 1/30/2014
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.22 A01

Other-than-serious 1 instance 1 exposed
Issued
Apr 2, 2014
Abate by
Apr 14, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.  (a) At the facility, the employer did not ensure that the passageways in and around the CNC saw are kept clean and in an orderly condition. Employees are exposed to slip, trip and fall hazards in that, the sawdust on the floor is not removed regularly.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339567208.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.