SMITHVILLE, TX —
OSHA Inspection: CEN-TEX MARINE FABRICATORS, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of CEN-TEX MARINE FABRICATORS, INC. in 1100 N.E. 1ST. ST., SMITHVILLE, TX 78957 (NAICS 332312). OSHA activity number 339570103.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CEN-TEX MARINE FABRICATORS, INC.
- Site address
- 1100 N.E. 1ST. ST.
- City
- SMITHVILLE
- State
- TX
- ZIP
- 78957
- Mailing
- 1100 N.E. 1ST. ST., SMITHVILLE, TX 78957
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 34
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.107 B05 I
- Issued
- Feb 28, 2014
- Abate by
- Mar 15, 2014
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.107(b)(5)(i): Visible gauges or audible alarm or pressure activated devices were not installed to indicate or insure that the required air velocity is maintained. On or about January 31, 2014, the employer did not ensure that the booths pressure gauge was visible and working, exposing employees to burn and smoke inhalation hazards.
Recent events (2)
- — I (S) $1260
- — Z (S) $2100
1910.107 B05 IV
- Issued
- Feb 28, 2014
- Abate by
- Mar 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(5)(iv): Space within the spray booth on the downstream and upstream sides of filters were not protected with approved automatic sprinklers: On or about January 31, 2014, the employer did not ensure that sprinkler heads were installed on the up and down stream sides of the spray booth filter, exposing employees to burn and smoke inhalation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.107 F03
- Issued
- Feb 28, 2014
- Abate by
- Mar 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(f)(3): Sprinklers protecting spraying areas were not kept as free from deposits as practical by cleaning daily if necessary. On or about January 31, 2014, the employer did not ensure that plastic bags covering the sprinkler heads were kept free of excessive paint deposits, exposing employees to a fire hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A02
- Issued
- Feb 28, 2014
- Abate by
- Mar 15, 2014
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible: On or about January 31, 2014, drill presses in the facility and old machine shop were missing their guards, exposing employees to the hazard of being caught in the rotating part of the of the press and struck by flying debris. a: The Powermatic Model 2000 220 volt drill press in the facility was missing its guard. b: The Jet Model JDP-14M 110 volt drill press in the facility was missing its guard. c: The Jet 20 variable speed 240 volt drill press in the old machine shop was missing its guard. d: The Big Joe 110 volt drill press in the old machine shop was missing its guard.
Recent events (2)
- — I (S) $1260
- — Z (S) $2100
1910.219 C02 I
- Issued
- Feb 28, 2014
- Abate by
- Mar 15, 2014
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: On or about January 31, 2014, the rotating shaft of the Number 4 Cincinnati milling machine was not guarded, exposing employees to the hazard of being caught on the rotating shaft.
Recent events (2)
- — I (S) $1260
- — Z (S) $2100
More inspections at Cen-Tex Marine Fabricators, INC.
View Cen-Tex Marine Fabricators, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339570103.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.