EAST HARTFORD, CT ·
OSHA Inspection: GRANNY'S PIE FACTORY, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GRANNY'S PIE FACTORY, LLC in 103 SCHOOL STREET, EAST HARTFORD, CT 06108 (NAICS 311813). OSHA activity number 339570608.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GRANNY'S PIE FACTORY, LLC
- Site address
- 103 SCHOOL STREET
- City
- EAST HARTFORD
- State
- CT
- ZIP
- 06108
- Mailing
- 103 SCHOOL STREET, EAST HARTFORD, CT 06108
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311813
- Employees
- 35
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.36 D01
- Issued
- Mar 13, 2014
- Abate by
- Mar 19, 2014
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: A. On or about February 12, 2014, Store Room: The designated emergency exit was locked with a deadbolt during hours of operation. In case of emergency, employees would not be able to immediately open the exit door.
Recent events (2)
- · I (S) $2100
- · Z (S) $3500
1910.36 G02
- Issued
- Mar 13, 2014
- Abate by
- Mar 19, 2014
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points: A. On or about February 12, 2014, Store Room: Access to the designated emergency exit was reduced to less than 28 inches by the storage and placement of cardboard boxes and plastic bins. Clearance was measured at 12 1/2 inches.
Recent events (2)
- · I (S) $1680
- · Z (S) $2800
1910.212 A01
- Issued
- Mar 13, 2014
- Abate by
- Apr 29, 2014
- Penalty
- Initial $4,200 · Current $2,520 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: A. On or about February 12, 2014, Bakery: 1. An Economatic 3-pie shell forming machine was unguarded, exposing employees to crushing injuries from the heated die. 2. The Colborne Dough Divider, Model 52 was missing a barrier guard on the front of the equipment, exposing employees to crushing injuries from the divider knife.
Recent events (2)
- · I (S) $2520
- · Z (S) $4200
1910.263 E02 I
- Issued
- Mar 13, 2014
- Abate by
- Jul 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.263(e)(2)(i): Vertical mixers did not comply with paragraphs (e)(1)(i), (iii), (ix), and (x) of this section and did not have all belts, chains, gears, pulleys, sprockets, clutches, and other moving parts completely enclosed as required by (e)(1)(i): A. On or about February 12, 2014, the following vertical mixers were not provided with enclosure guarding or other means to prevent contact with moving parts: 1. Bakery, near ovens: Hobart 5 HP, Model V-1401 vertical mixer. 2. Bakery, near dough cutter: Artofex twin-arm vertical mixer. 3. Bakery, near dough cutter: F.W. Pagani, Model 11 twin-arm vertical mixer. 4. Cream Room: Hobart 2 HP, Model M-802 vertical mixer.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1904.29 A
- Issued
- Mar 13, 2014
- Abate by
- Apr 29, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.29(a): A Log of all Work-Related Injuries and Illnesses (OSHA Form 300), and/or the Summary of Work-Related Injuries (OSHA Form 300A), and/or the Injury and Illness Incident Report (OSHA Form 301) or equivalent forms were not kept by the establishment: A. Located at Granny's Pie Factory, LLC, East Hartford, Connecticut: On or about February 12, 2014, the employer had not maintained an OSHA 300 Log of Work-Related Injury and Illness for Calendar Year 2013, where recordable injuries were sustained.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.1200 E01
- Issued
- Mar 13, 2014
- Abate by
- Jul 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: A. On or about February 12, 2014, Bakery: The employer had not developed and implemented a written hazard communication program addressing container labeling, safety data sheets and employee information and training for employees exposed to hazardous chemicals including, but not limited to degreasers and bleach.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 311813)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339570608.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.