DWIGHT, IL ·
OSHA Inspection: R.R. DONNELLEY & SONS COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of R.R. DONNELLEY & SONS COMPANY in 801 N. UNION ST., DWIGHT, IL 60420 (NAICS 323110). OSHA activity number 339573214.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- R.R. DONNELLEY & SONS COMPANY
- Site address
- 801 N. UNION ST.
- City
- DWIGHT
- State
- IL
- ZIP
- 60420
- Mailing
- 801 N. UNION ST., DWIGHT, IL 60420
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323110
- Employees
- 400
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.147 C04 II B
- Issued
- Apr 11, 2014
- Abate by
- Apr 23, 2014
- Penalty
- Initial $3,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The employer did not develop and document energy control procedures that clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: An employee was exposed to cuts and abrasions while performing servicing and maintenance tasks on the gathering line carousel near the 802 transfer because the specific steps for shutting down, isolating, blocking and securing equipment to control hazardous energy was not clearly and specifically outlined.
Recent events (3)
- · F (S) $0
- · C (S) $3000
- · Z (S) $3000
1910.147 C07 I
- Issued
- Apr 11, 2014
- Abate by
- Apr 23, 2014
- Penalty
- Initial $0 · Current $2,000
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: An employee was exposed to cuts and abrasions while performing servicing and maintenance tasks on the gathering line carousel near the 802 transfer and the employer did not provide training to employee on the knowledge and skills required for the safe application, usage and removal of energy control devices.
Recent events (3)
- · F (S) $2000
- · C (S) $0
- · Z (S) $0
1910.147 D04 I
- Issued
- Apr 11, 2014
- Abate by
- Apr 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees: An employee was exposed to cuts and abrasions while performing servicing and maintenance tasks on the gathering line carousel near the 802 transfer because lockout or tagout devices were not affixed to the pneumatic and electric energy sources.
Recent events (3)
- · F (S) $0
- · C (S) $0
- · Z (S) $0
1910.212 A01
- Issued
- Apr 11, 2014
- Abate by
- Apr 23, 2014
- Penalty
- Initial $3,000 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by an ingoing nip point and rotating parts: Employees were exposed to cuts and abrasions because an ingoing nip point and rotating parts on the 932 press delivery line near the weigh scale was not guarded.
Recent events (3)
- · F (S) $2000
- · C (S) $3000
- · Z (S) $3000
1910.22 A01
- Issued
- Apr 11, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(1): Place(s) of employment were not kept clean and orderly, or in a sanitary condition: Employees near the 802 transfer jogger were exposed to tripping hazards while walking through an aisle way because of the presence of tools and equipment in the walkway.
Recent events (3)
- · F (O) $0
- · C (O) $0
- · Z (O) $0
More inspections at R.R. Donnelley & Sons Company
View R.R. Donnelley & Sons Company's full OSHA safety record →
More inspections in this industry (NAICS 323110)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339573214.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.