CALHOUN CITY, MS ·
OSHA Inspection: KIDZ WORLD FURNITURE
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KIDZ WORLD FURNITURE in 413 EAST HIGHWAY 8, CALHOUN CITY, MS 38916 (NAICS 337121). OSHA activity number 339574162.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KIDZ WORLD FURNITURE
- Site address
- 413 EAST HIGHWAY 8
- City
- CALHOUN CITY
- State
- MS
- ZIP
- 38916
- Mailing
- P.O. BOX 1250, CALHOUN CITY, MS 38916
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337121
- Employees
- 31
- Ownership type
- Private (A)
Citations
7 citations on file for this inspection.
1910.37 B01
- Issued
- Apr 25, 2014
- Abate by
- May 21, 2014
- Penalty
- Initial $1,785 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.37(b)(1): 29 CFR 1910.37(b)(1): Each exit route was not adequately lighted so that employees with normal vision could see along the exit route: (a) Throughout the facility - On or about February 4, 2014, the employer did not have any means of illumination for employees to see and locate the exits in the event of a power failure.
Recent events (2)
- · I (S) $1071
- · Z (S) $1785
1910.178 L01 I
- Issued
- Apr 25, 2014
- Abate by
- May 21, 2014
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) In the facility - On or about February 4, 2014, industrial truck (fork lifts) operators had not been trained in truck-related topics and workplace-related topics and an evaluation of the operator's performance in the workplace.
Recent events (2)
- · I (S) $1428
- · Z (S) $2380
1910.212 A03 II
- Issued
- Apr 25, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $1,785 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines, whose operation exposes an employee to injury, were not guarded. (a) Sewing Department - On or about February 4, 2014, needle guards were missing on the sewing machines.
Recent events (2)
- · I (S) $1071
- · Z (S) $1785
1910.219 C04 I
- Issued
- Apr 25, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: (a) Fiber Department - On or about February 4, 2014, the fiber shedding shaft on the side of the fiber machine had a rotating shaft that projected greater than 1/2 of its diameter.
Recent events (2)
- · I (S) $1428
- · Z (S) $2380
1910.219 C04 II
- Issued
- Apr 25, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(ii): The unused keyway(s) of projecting shaft end(s) were not filled up or covered: (a) Fiber Department - On or about February 4, 2014, the fiber shedding shaft on the side of the fiber machine had a rotating shaft with an unused keyway that was not guarded.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.242 B
- Issued
- Apr 25, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 psi.: (a) Sewing Department - On or about February 4, 2014, the air pressure at the tip of the air nozzle used to clean the sewing machines measured 95 psi.
Recent events (2)
- · I (S) $1428
- · Z (S) $2380
1910.1200 G08
- Issued
- Apr 25, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not ensure that material safety data sheets were readily accessible to the employees in their work area during each work shift: (a) In the facility - On or about February 4, 2014, there were no MSDS for available for employees during their work shift.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 337121)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339574162.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.