MONROE, GA —
OSHA Inspection: WALTON PRESS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WALTON PRESS, INC. in 402 MAYFIELD DRIVE, MONROE, GA 30655 (NAICS 323119). OSHA activity number 339581100.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WALTON PRESS, INC.
- Site address
- 402 MAYFIELD DRIVE
- City
- MONROE
- State
- GA
- ZIP
- 30655
- Mailing
- 402 MAYFIELD DRIVE, MONROE, GA 30655
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323119
- Employees
- 104
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.24 H
- Issued
- Apr 16, 2014
- Penalty
- Initial $4,860 · Current $2,916 Reduced
General-duty citation text
29 CFR 1910.24(h): Standard railings were not provided on the open sides of all exposed stairways and stair platforms: On or about 2/10/2014 in the press room area; employees using the fixed stairs to access the upper platform of the press equipment are exposed to a 7 feet 10 inch fall hazard from the missing midrails.
Recent events (2)
- — I (S) $2916
- — Z (S) $4860
1910.147 C04 I
- Issued
- Apr 16, 2014
- Abate by
- May 5, 2014
- Penalty
- Initial $5,670 · Current $3,402 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about 2/10/2014 in the press area; specific procedures were not developed for the large press machine where employees were observed servicing the press blankets without de-energizing the equipment.
Recent events (2)
- — I (S) $3402
- — Z (S) $5670
1910.147 C06 I
- Issued
- Apr 16, 2014
- Abate by
- May 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: On or about 2/10/2014 in the VGM and Bindry production lines; where employees perform servicing and maintenance on equipment located on the Bindry and VGM lines periodic inspections of the specific procedures had not been performed. a. Bindry Production areas - most recent review of the procedures was December 2012 b. VGM Production areas - most recent review of the procedures was December 2012
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 IV
- Issued
- Apr 16, 2014
- Abate by
- May 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: On or about 2/10/2014 in the production areas; the employer did not certify and maintain records of the employees that performed maintenance and service activities such as but not limited to maintenance, adjustment, setting up, inspecting and cleaning a variety of machines and equipment. 1. Bindry equipment 2. Mailer equipment 3. Large Press equipment
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L02 III
- Issued
- Apr 16, 2014
- Abate by
- May 5, 2014
- Penalty
- Initial $4,050 · Current $2,430 Reduced
General-duty citation text
29 CFR 1910.178(l)(2)(iii): All operator training and evaluation was not conducted by persons who had the knowledge, training, and experience to train powered industrial truck operators and evaluate their performance: On or about 2/10/2014 at 402 Mayfield Drive in Monroe, GA; the shipping supervisor, that was providing powered industrial truck training to the operators since September 2013 did not have the knowledge or experience to evaluate the employees.
Recent events (2)
- — I (S) $2430
- — Z (S) $4050
1910.303 B02
- Issued
- Apr 16, 2014
- Abate by
- May 5, 2014
- Penalty
- Initial $4,050 · Current $2,430 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: On or about 2/10/2014 in the bindry production area; Metal receptacle outlet boxes used to supply 120 volt to equipment, a radio, and other electrical equipment was not securely and rigidly fastened to a support structure or otherwise secured.
Recent events (2)
- — I (S) $2430
- — Z (S) $4050
More inspections at Walton Press, INC.
View Walton Press, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 323119)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339581100.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.