Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PEAK PROFESSIONAL CONTRACTORS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PEAK PROFESSIONAL CONTRACTORS, INC. in 5262 N NEVADA AVE., COLORADO SPRINGS, CO 80907 (NAICS 236220). OSHA activity number 339587859.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Peak Professional Contractors, INC. — free Get an email when a new federal OSHA severe-injury report for Peak Professional Contractors, INC. is published. One employer, no account, unsubscribe in one click.
Site address
5262 N NEVADA AVE.
City
COLORADO SPRINGS
State
CO
ZIP
80907
Mailing
1029 S. SIERRA MADRE, COLORADO SPRINGS, CO 80903
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
3
Ownership type
A

5 citations on file for this inspection.

1926.453 B02 V

Other-than-serious 1 instance 1 exposed
Issued
Feb 26, 2014
Abate by
Mar 6, 2014
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift:  Note:  As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system.  The use of a body belt in a tethering system or in a restraint system is acceptable and is regulated:    (a)  On or about February 7, 2014, the employer did not ensure that an employee was protected from a fall hazard while elevated and working from an extendable boom aerial lift without a fall restraint system or a fall protection system.    Abatement Note:  Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $2800
  • — Z (S) $2800

1926.501 B01

Other-than-serious 1 instance 2 exposed
Issued
Feb 26, 2014
Abate by
Mar 6, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:    (a)  On or about February 7, 2014, the employer did not ensure that employees were protected from a fall of greater than six feet while working from the canopy of the building under construction without fall protection.    Abatement Note:  Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1926.501 B10

Deleted Serious 1 instance 2 exposed
Issued
Feb 26, 2014
Abate by
Mar 6, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system:    (a)  On or about February 7, 2014, Peal Professional Contractors, Inc., as controlling employer, did not ensure that employees of Norton Sheet Metal Inc., subcontractor, were protected from a fall of greater than six feet while they were working from the roof of the building under construction without fall protection.    Abatement Note:  Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.503 A01

Other-than-serious 1 instance 2 exposed
Issued
Feb 26, 2014
Abate by
Mar 6, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    (a)  On or about February 7, 2014, the employer did not ensure that employees who were exposed to fall hazards were trained to recognize and mitigate the hazards.    Abatement Note:  Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1926.701 B

Other-than-serious 1 instance 10 exposed
Issued
Feb 26, 2014
Abate by
Mar 6, 2014
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.701(b): All protruding reinforcing steel, onto and/or into which employees could fall or come against, was not guarded to eliminate the hazard of impalement:    (a)  On or about February 7, 2014, and at times prior, Peak Professional Contractors Inc., as controlling and exposing employer, did not ensures that workers at the construction site were protected from impalement hazards in that the pieces of rebar in the ground on the east side of the building were not capped.      Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $1600
  • — Z (S) $1600

View Peak Professional Contractors, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339587859.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.