BALDWYN, MS ·
OSHA Inspection: MAPLE LAND AND TIMBER, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MAPLE LAND AND TIMBER, LLC in 257 HWY 30 W., BALDWYN, MS 38824 (NAICS 321113). OSHA activity number 339600751.
What this inspection record means
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Maple Land and Timber, LLC for free
Get an email when a new federal OSHA severe-injury report for Maple Land and Timber, LLC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- MAPLE LAND AND TIMBER, LLC
- Site address
- 257 HWY 30 W.
- City
- BALDWYN
- State
- MS
- ZIP
- 38824
- Mailing
- 257 HIGHWAY 30 W., BALDWYN, MS 38824
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 14
- Ownership type
- Private (A)
Citations
8 citations on file for this inspection.
1910.219 D01
- Issued
- Mar 18, 2014
- Abate by
- Apr 11, 2014
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Mill No.1 and Mill No. 2 - On or about February 25, 2014 employees were exposed to amputation hazards while working near motor drive pulley systems. Pulleys and belts were not guarded on the following: (1) Mill No. 1, West End - Wood chipper/hog. (2) Mill No. 1, Saw Carriage - Main drive pulley system (3) Mill No. 1, East Side - Two piston type air compressor main drive pulley systems. (4) Mill No. 2, Saw Carriage Platform, West Side - Two motor drive pulley systems.
Recent events (2)
- · I (S) $2450
- · Z (S) $4900
1910.265 C04 II
- Issued
- Mar 18, 2014
- Abate by
- Apr 4, 2014
- Penalty
- Initial $4,200 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.265(c)(4)(ii): Walkway(s) were not evenly floored: (a) Mill No. 1, Saw Carriage Area, East End - On or about February 25, 2014 employees were exposed to a 6 foot fall hazard while accessing or egressing the saw carriage. The walkway did not have an evenly floored expanded metal platform.
Recent events (2)
- · I (S) $2100
- · Z (S) $4200
1910.265 C04 IV
- Issued
- Mar 18, 2014
- Abate by
- Apr 11, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.265(c)(4)(iv): Elevated platform(s), 4 feet or more from the floor level, were not provided with a standard railing: (a) Mill No. 1, Saw Carriage Area, East End - On or about February 25, 2014 employees were exposed to a 6 foot fall hazard while accessing or egressing the saw carriage area. Elevated platform did not have standard railings.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.265 C05 II
- Issued
- Mar 18, 2014
- Abate by
- Apr 11, 2014
- Penalty
- Initial $4,200 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.265(c)(5)(ii): Stairways were not provided with a standard handrail on at least one side or on any open side: (a) Mill No. 1, Saw Carriage Access Platform, East Side - On or about February 25, 2014 employees were exposed to a 6 foot fall hazard while using a stair to access or egress the saw carriage platform. Standard handrails were not provided on each open side of stair. (b) Mill No. 2, Saw Carriage Platform, West Side - On or about February 25, 2014 employees were exposed to a 36 inch fall hazard while using a stair to access or egress the saw carriage platform. Standard handrails were not provided on each open side of stair.
Recent events (2)
- · I (S) $2100
- · Z (S) $4200
1910.265 C18 I
- Issued
- Mar 18, 2014
- Abate by
- Apr 11, 2014
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.265(c)(18)(i): Pulley(s), sprocket(s), sheave(s), drum(s) and block(s) of conveyor(s) were not arranged to prevent the possibility of injury due to hands or parts of clothing being caught between the belt(s) and pulley(s) or chain(s) and sprockets: (a) Mill No. 1, Outfeed Conveyor - On or about February 25, 2014 employees were exposed to amputation hazards from ingoing nip points while working near the chain outfeed conveyor. There was no guard protecting employees from getting caught in running nip points.
Recent events (2)
- · I (S) $1750
- · Z (S) $3500
1910.333 C03 I A 1
- Issued
- Mar 18, 2014
- Abate by
- May 2, 2014
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.333(c)(3)(i)(A)(1): When an unqualified person was working in an elevated position near overhead lines with voltages to ground rated at 50 kV or below, the location was not such that the person and the longest conductive object he or she could contact was 10 feet or more from the overhead lines: (a) Mill No. 1, Log Deck - On or about February 25, 2014 an employee was exposed to electric shock hazard from overhead electric power lines while using a stationary mount loader to load logs onto Mill No. 1's log deck. The conductive loader boom was located within 10 feet of overhead electric power lines.
Recent events (2)
- · I (S) $0
- · Z (S) $2800
1910.106 B06
- Issued
- Mar 18, 2014
- Abate by
- Apr 4, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.106(b)(6): In locations where flammable vapors may be present, precautions were not taken to prevent ignition by eliminating or controlling sources of ignition. Sources of ignition may include open flames, lightning, smoking, hot surfaces, frictional heat, sparks (static, electrical, and mechanical), spontaneous ignition, chemical and physical-chemical reactions, and radiant heat: (a) Mill No. 2, South Side - On or about February 25, 2014 employees were exposed to fire hazards while working near or walking by an aboveground diesel fuel tank. "No Smoking" signs were not posted.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.1200 E01
- Issued
- Mar 18, 2014
- Abate by
- May 2, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) Sawmill - On or about February 25, 2014 employees were exposed to hazardous chemicals, such as, motor oil, hydraulic fluid and diesel fuel. The employer had not developed a written hazard communication program.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 321113)
Aug 26, 2026
161807 - Blackwood Solutions, LLC · NEWTON GROVE, NC
Aug 26, 2026
Menominee Tribal Enterprises · NEOPIT, WI
Aug 20, 2026
317745136 - Stimson Lumber CO · TILLAMOOK, OR
Aug 20, 2026
Palletone, INC · BOWLING GREEN, VA
Aug 14, 2026
Sierra Pacific Industries · BELDEN, CA
More inspections in MS
Aug 18, 2026
TIM Parker Construction, INC. · HATTIESBURG, MS
Jul 28, 2026
Nantong Chaoda Equipment CO. LTD · SHANNON, MS
Jul 26, 2026
Perry Lofton Logging, LLC · LUMBERTON, MS
Jul 20, 2026
M&N Group LLC · SUMRALL, MS
Jul 17, 2026
A2H Transport, LLC · MAGEE, MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339600751.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.