GREENE, NY ·
OSHA Inspection: RANDY HAY CONSTRUCTION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RANDY HAY CONSTRUCTION in BEREAN BIBLE CHURCH, 109 GENEGANSLET ROAD, GREENE, NY 13778 (NAICS 236220). OSHA activity number 339601486.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RANDY HAY CONSTRUCTION
- Site address
- BEREAN BIBLE CHURCH, 109 GENEGANSLET ROAD
- City
- GREENE
- State
- NY
- ZIP
- 13778
- Mailing
- 163 ALEXANDER ROAD, CHENANGO FORKS, NY 13746
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 4
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.153 O
- Issued
- Mar 3, 2014
- Abate by
- Mar 11, 2014
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
29 CFR 1926.153(o): When damage to LP-Gas systems from vehicular traffic was a possibility, precautions against such damage were not taken: a) West side building, south of job trailer, on or about 2-25-14: Employees were working in an area immediately adjacent to two 100 pound Liquefied Petroleum Gas (LPG) tanks that were not protected against accidental contact.
Recent events (2)
- · I (O) $0
- · Z (S) $1600
1926.350 A09
- Issued
- Mar 3, 2014
- Abate by
- Mar 11, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.350(a)(9): Compressed gas cylinder(s) were not secured in an upright position: a) West side building, south of job trailer, on or about 2-25-14: Employees were working in an area immediately adjacent to two 100 pound Liquefied Petroleum Gas (LPG) tanks that were not secured.
Recent events (2)
- · I (O) $0
- · Z (S) $0
1926.304 F
- Issued
- Mar 3, 2014
- Abate by
- Mar 11, 2014
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
1926.304(f) Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws were not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator: 1926.304(f) Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws did not have non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: 1926.304(f) Section 5.1.3.3 American National Standards Institute 01.1-1975, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Electrically driven equipment was not equipped with magnetic switches or other devices that will prevent automatic restarting of the machine after a power failure: a) North end of building, west of sanctuary, on or about 2-25-14: Employees were ripping wood and foam panels on a table saw that was not equipped with a spreader. b) North end of building, west of sanctuary, on or about 2-25-14: Employees were ripping wood and foam panels on a table saw that was not equipped with non kick-back fingers or "dogs". c) North end of building, west of sanctuary, on or about 2-25-14: Employees were ripping wood and foam panels on a table saw that was not equipped with a magnetic switch or anti-restart device.
Recent events (2)
- · I (S) $0
- · Z (S) $1600
1926.304 I01
- Issued
- Mar 3, 2014
- Abate by
- Mar 11, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(i)(1): Each circular had-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut. a) North end of building, west of sanctuary, on or about 2-25-14: Employees were ripping wood and foam panels on a table saw that was not equipped with a hood guard that automatically adjusts to enclose the saw blade.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.404 F06
- Issued
- Mar 3, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) West end of building, temporary power panel, on or about 2-25-14: Employees were operating a variety of hand held power tools and providing power to a trailer, through two cords that did not have a continuous path to ground due to a missing a ground pin.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 236220)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339601486.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.