TEXARKANA, AR —
OSHA Inspection: COOPER TIRE & RUBBER COMPANY, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of COOPER TIRE & RUBBER COMPANY, INC. in 3500 WASHINGTON ST., TEXARKANA, AR 71854 (NAICS 326211). OSHA activity number 339602070.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COOPER TIRE & RUBBER COMPANY, INC.
- Site address
- 3500 WASHINGTON ST.
- City
- TEXARKANA
- State
- AR
- ZIP
- 71854
- Mailing
- 3500 WASHINGTON ST., TEXARKANA, AR 71854
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326211
- Employees
- 1650
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.216 B01 III
- Issued
- Jul 14, 2014
- Abate by
- Jul 18, 2014
- Penalty
- Initial $7,000 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.216(b)(1)(iii): Safety tripwire cable or wire center cord was not located within 2 inches of a vertical plane tangent to the front and rear rolls. The tripwire cable or wire center cord did not operate readily whether the cable or cord was pushed or pulled: a. On or about March 19, 2014 and prior thereto at the 2 X 2 Breakdown Mill the trip safety trip cable at the feed side of the mill was approximately 6 inches from the vertical plane tangent to the smooth roller , exposing employees to the hazard of not being able to reach the safety trip cable if they were caught by the rubber or in the bite of the mill. b. On or about March 19, 2014 and prior thereto, at the 2X2 Breakdown Mill the safety trip cable at the feed side of the mill did not operate when pulled up in that the overhead conveyor interfered with it being pulled up enough to activate the switch. This condition exposed employees to the hazard of not being able to stop the mill if they were caught by the rubber or in the bite of the mill. c. On or about March 19, 2014 and prior thereto, at the 2X2 Breakdown Mill the safety trip cable at the back side of the mill was more than two inches from the vertical plane tangent to the corrugated roller, exposing employees to the hazard of not being able to reach the safety trip cable they were caught by the rubber or in the bite of the mill.
Recent events (2)
- — I (S) $5000
- — Z (S) $7000
1910.216 F01
- Issued
- Jul 14, 2014
- Abate by
- Jul 18, 2014
- Penalty
- Initial $7,000 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.216(f)(1): Measurements on mills and/or calendars were not taken with the rolls running empty at maximum operating speed: a. On or about May 8, 2014 and times prior thereto at the cracker mill, stop distance measurements were taken with rubber on the rolls. b. On or about May 8, 2014 and times prior thereto at the 2X2 breakdown mill, stop distance measurements were taken with rubber on the rolls.
Recent events (2)
- — I (S) $5000
- — Z (S) $7000
1910.1030 F02 I
- Issued
- Jul 14, 2014
- Abate by
- Jul 18, 2014
- Penalty
- Initial $4,000 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.1030(f)(2)(i): Hepatitis B vaccination was not made available within 10 working days of initial assignment to all employee(s) with occupational exposure: On or about April 29, 2014 and prior thereto, the hepatitis B vaccination was not made available to employees on the mill rescue team and emergency response team who had occupational exposure to blood or other potentially infectious material.
Recent events (2)
- — I (O) $3000
- — Z (S) $4000
1910.1030 G02 I
- Issued
- Jul 14, 2014
- Abate by
- Jul 18, 2014
- Penalty
- Initial $4,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1030(g)(2)(i): The employer did not ensure that each employee with occupational exposure participated in a training program: On or about April 29, 2014 and prior thereto, all employees on the mill rescue team with occupational exposure to blood or other potentially infectious material (OPIM) were not provided with training.
Recent events (2)
- — I (O) $0
- — Z (S) $4000
1910.1030 G02 IV
- Issued
- Jul 14, 2014
- Abate by
- Jul 18, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1030(g)(2)(iv): Annual training for employees with occupational exposure was not provided within one year of their previous training: On or about May 13, 2014 and prior thereto, employees on the mill response team were not provided with annual training on bloodborne pathogens.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.1030 H02 I
- Issued
- Jul 14, 2014
- Abate by
- Jul 18, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1030(h)(2)(i): The employer's records for annual bloodborne pathogen training did not include all of the elements required by (h)(2)(i)(A)-(D) of 29 CFR 1910.1030: a. On or about May 13, 2014 and prior thereto, the mill response team training records for annual bloodborne pathogen training did not include a summary of the contents of the training session and the names and qualifications of the persons conducting the training. b. On or about March 28, 2014 and prior thereto, the emergency response tem training records for annual bloodborne pathogen training did not include a summary of the contents of the training session and the names and qualifications of the persons conducting the training.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections at Cooper Tire & Rubber Company, INC.
View Cooper Tire & Rubber Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326211)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339602070.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.