LEDGEWOOD, NJ — 2014-03-04 00:00:00

OSHA Inspection: ADAM METAL PRODUCTS COMPANY

Follow-up inspection · Safety discipline

At a glance

On 2014-03-04 00:00:00, OSHA opened a follow-up safety inspection of ADAM METAL PRODUCTS COMPANY in 7 ORBEN DR., LEDGEWOOD, NJ 07852 (NAICS 335122). OSHA activity number 339609315.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Adam Metal Products Company — free Get an email when a new federal OSHA severe-injury report for Adam Metal Products Company is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: ADAM METAL PRODUCTS COMPANY
Site address: 7 ORBEN DR.
City: LEDGEWOOD
State: NJ
ZIP: 07852
Mailing: PO BOX 450, LEDGEWOOD, NJ 07852

What kind of inspection was it?

Inspection type: Follow-up (F)
Scope: Partial (B)
Discipline: Safety
Advance notice: No
Union status: B

When did the case open and close?

Opened: 2014-03-04 00:00:00
Closing conference: 2014-03-04 00:00:00
Case closed: 2015-07-27 00:00:00
Last modified: 2026-07-21 00:00:00
Data loaded: 2026-07-22 00:19:54

Establishment context

NAICS code: 335122
Employees: 46
Ownership type: A

Citations

3 citations on file for this inspection.

1910.147 C07 I A

Repeat Gravity 10 1 instance 2 exposed

Issued: Jun 27, 2014
Abate by: Jul 24, 2014
Penalty: Initial $9,800 · Current $6,000 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation:    a) Establishment    Maintenance employees conducted lockout on mechanical power press without receiving authorized training.    Violation occurred on or about 3/4/2014.      Adam Metal Products Company was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29CFR 1910.147(c)(7)(I), which was contained in OSHA inspection number 31500947, citation number 1, item number 1b and was affirmed as a final order on May 11, 2011.

Recent events (2)

2014-07-23 00:00:00 — I (R) $6000
2014-06-27 00:00:00 — Z (R) $9800

1910.1200 H01

Repeat Gravity 5 1 instance 2 exposed

Issued: Jun 27, 2014
Abate by: Jul 24, 2014
Penalty: Initial $5,600 · Current $3,000 Reduced

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    a) establishment    Maintenance employees were not provided with hazard communication training for chemical including but not limited to the following: sulfuric acid (forklift battery acid), hydraulic fluid, greases, and lubricants.    Violation occurred on or about 3/4/2014.    Adam Metal Products Company was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29CFR1910.1200(h)(1), which was contained in OSHA inspection number 315300947, citation number 1, item number5b, and was affirmed as a final order on May 11, 2011.

Recent events (2)

2014-07-23 00:00:00 — I (R) $3000
2014-06-27 00:00:00 — Z (R) $5600

1904.32 A04

Repeat 1 instance 46 exposed

Issued: Jun 27, 2014
Penalty: Initial $1,400 · Current $1,080 Reduced

General-duty citation text

29 CFR 1904.32(a)(4): The employer did not post an OSHA 300A Form or equivalent by February 1 thru April 30.    The employer failed to post the 2013 annual summary of work-related injuries and illnesses.    Violation observed on or about 3/4/2014.    Adam Metal Products Company was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1904.34(a)(4) which was contained in OSHA inspection number 31500947, citation number 2, item number 1 and was affirmed as a final order on (date), with respect to a workplace located at 7 Orben Dr., Ledgewood, NJ 07852.

Recent events (2)

2014-07-23 00:00:00 — I (R) $1080
2014-06-27 00:00:00 — Z (R) $1400

More inspections at Adam Metal Products Company

Mar 4, 2014 LEDGEWOOD, NJ Mar 4, 2014 LEDGEWOOD, NJ Mar 18, 2011 LEDGEWOOD, NJ Mar 9, 2011 LEDGEWOOD, NJ

View Adam Metal Products Company's full OSHA safety record →

More inspections in this industry (NAICS 335122)

May 21, 2026 LSI Industries INC · BLUE ASH, OH May 8, 2026 DMK U.S.A., INC. · STEVENS POINT, WI Apr 28, 2026 DMK U.S.A., INC. · STEVENS POINT, WI Apr 20, 2026 Lightera, LLC · NORCROSS, GA Feb 5, 2026 Aron Lighting LLC · CONSHOHOCKEN, PA

More inspections in NJ

Jul 17, 2026 East Orange Community Charter School · EAST ORANGE, NJ Jul 17, 2026 East Orange Community Charter School · EAST ORANGE, NJ Jul 17, 2026 East Orange Community Charter School · EAST ORANGE, NJ Jul 17, 2026 John Caruso Builders LLC · MOUNTAIN LAKES, NJ Jul 16, 2026 Borough of Pennington Department of Public Works · PENNINGTON, NJ

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339609315.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.