SOMERVILLE, MA ·
OSHA Inspection: M. DISANDRO & SON MASONRY, INC.
Programmed Related inspection · Safety discipline
At a glance
On , OSHA opened a programmed Related safety inspection of M. DISANDRO & SON MASONRY, INC. in 450 ARTISAN WAY, SOMERVILLE, MA 02145 (NAICS 238140). OSHA activity number 339610917.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- M. DISANDRO & SON MASONRY, INC.
- Site address
- 450 ARTISAN WAY
- City
- SOMERVILLE
- State
- MA
- ZIP
- 02145
- Mailing
- 9 INDUSTRIAL ROAD, CRANSTON, RI 02920
What kind of inspection was it?
- Inspection type
- Programmed Related (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 50
- Ownership type
- Private (A)
Citations
7 citations on file for this inspection.
1910.178 L01 I
- Issued
- Mar 31, 2014
- Abate by
- May 15, 2014
- Penalty
- Initial $3,500 · Current $3,500
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l) and as referanced in the note in CFR 29 1926.602(d): (a) Location: 450 Artisan Way, Somerville, MA On or about 3/4/14, the employer did not ensure an employee operating an all-terrain fork lift had successfully completed training to in the operation of the powered industrial truck.
Recent events (1)
- · Z (S) $3500
1926.405 A02 II I
- Issued
- Mar 31, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.405(a)(2)(ii)(I): Flexible cords and cables used for temporary wiring were not protected from damage: (a) Location: 450 Artisan Way, block 2 exterior of building On or about 3/4/14, employees were not protected from electric shock and burns from an electrical cord that was not protected from motor vehicles running over it.
Recent events (1)
- · Z (S) $2800
1926.405 G02 IV
- Issued
- Mar 31, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: (a) Location: 450 Artisan Way, block 2 exterior of building On or about 3/4/14, employees were not protected from electric shock and burns from an electrical cord that had no strain relief.
Recent events (1)
- · Z (S) $0
1926.416 E01
- Issued
- Mar 31, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: (a) Location: building exterior On or about 3/4/14, employees were not protected from electric shock and burns from an electrical cord that was frayed.
Recent events (1)
- · Z (S) $0
1926.451 G01
- Issued
- Mar 31, 2014
- Penalty
- Initial $4,900 · Current $4,900
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level. (a) Location: 450 Artisan Way, block 2 exterior of building On or about 3/4/14, employees were not protected from falling more than 10 feet while working on a fabricated frame scaffold.
Recent events (1)
- · Z (S) $4900
1926.502 D16 III
- Issued
- Mar 31, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.502(d)(16)(iii): Personal fall arrest systems, when stopping a fall, were not rigged such that an employee could not free fall more than 6 feet (1.8 m) nor contact any lower level: (a) Location: 450 Artisan Way, block 2 exterior of building On or about 3/4/14, the employer did not ensure personal fall arrest systems were rigged to limit free fall to 6 feet or less.
Recent events (1)
- · Z (S) $2800
1926.602 C01 I
- Issued
- Mar 31, 2014
- Abate by
- Apr 10, 2014
- Penalty
- Initial $4,900 · Current $4,900
General-duty citation text
29 CFR 1926.602(c)(1)(i): Lifting and hauling equipment did not have the rated capacity clearly posted on the vehicle so as to be clearly visible to the operator: (a) Location: 450 Artisan Way, Somerville, MA On or about 3/4/14, an all-terrain fork lift did not have the vehicle's rated capacity visible to the operator.
Recent events (1)
- · Z (S) $4900
More inspections at M. Disandro & SON Masonry, INC.
View M. Disandro & SON Masonry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339610917.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.