PROVIDENCE, RI —
OSHA Inspection: ATAMIAN MANUFACTURING CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ATAMIAN MANUFACTURING CORP. in 910 PLAINFIELD ST, PROVIDENCE, RI 02909 (NAICS 332119). OSHA activity number 339611089.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ATAMIAN MANUFACTURING CORP.
- Site address
- 910 PLAINFIELD ST
- City
- PROVIDENCE
- State
- RI
- ZIP
- 02909
- Mailing
- 910 PLAINFIELD ST, PROVIDENCE, RI 02909
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332119
- Employees
- 13
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Apr 3, 2014
- Abate by
- Apr 25, 2014
- Penalty
- Initial $1,600 · Current $1,360 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts: (a) Tool room: The rotating chucks of the two South Bend lathes were not provided with an adequate guard or guarding device, on or about 3-4-14.
Recent events (2)
- — I (S) $1360
- — Z (S) $1600
1910.215 A04
- Issued
- Apr 3, 2014
- Abate by
- Jun 27, 2014
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) Tool room: The work rest on the Providence Machine Exchange pedestal grinder was adjusted to 3/4 inch on the left side, and thus was not adjusted closely to the wheel with a maximum opening of one-eighth inch, on or about 3-4-14.
Recent events (2)
- — I (S) $0
- — Z (S) $1200
1910.215 B09
- Issued
- Apr 3, 2014
- Abate by
- Apr 25, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: (a) Tool room: The distance between the abrasive wheel periphery and the adjustable tongue at the top of the Providence Machine Exchange pedestal grinder was seven-eighths inch on the left side, and thus exceeded one-fourth inch, on or about 3-4-14.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 C01 I
- Issued
- Apr 3, 2014
- Abate by
- May 16, 2014
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press(es): (a) Press area: The Bliss Mechanical power press in use at the facility was not guarded by any point of operation guards or properly applied point of operation devices, on or about 3-4-14.
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
More inspections at Atamian Manufacturing Corp.
View Atamian Manufacturing Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 332119)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339611089.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.