NEW BRITAIN, CT —
OSHA Inspection: WINSLOW AUTOMATICS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of WINSLOW AUTOMATICS, INC. in 23 ST. CLAIR AVENUE, NEW BRITAIN, CT 06051 (NAICS 332999). OSHA activity number 339612533.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WINSLOW AUTOMATICS, INC.
- Site address
- 23 ST. CLAIR AVENUE
- City
- NEW BRITAIN
- State
- CT
- ZIP
- 06051
- Mailing
- 23 ST. CLAIR AVENUE, NEW BRITAIN, CT 06051
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 87
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A03 II
- Issued
- Jun 3, 2014
- Abate by
- Jul 21, 2014
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: A. On or about March 12, 2014, CNC Lathe Department: The following equipment was not provided with interlocked enclosure guards, allowing access to the point of operation during the operating cycle: 1. Hitachi Seiki Hi Cell 23 II CNC Lathe 2. Hitachi Seiki HiTec Turn 23J Super Productive Turning Cell 3. Hitachi Seiki HiTec Turn 20 SII CNC Lathe B. On or about March 12, 2014, CNC Turning Center Department: The following equipment had bypassed interlocks, which allowed access to the point of operation during the operating cycle: 1. Doosan Daewoo DMV 3016, #D1, CNC Vertical Machining Center 2. Doosan Daewoo DMV 3016, #D2, CNC Vertical Machining Center
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.242 B
- Issued
- Jun 3, 2014
- Abate by
- Jul 21, 2014
- Penalty
- Initial $2,100 · Current $1,050 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: A. On or about March 12, 2014, Turning Center Department, at the Doosan Daewoo DMV 3016, #D2, compressed air used for cleaning was not reduced to below 30 p.s.i. when dead-ended.
Recent events (2)
- — I (S) $1050
- — Z (S) $2100
1910.147 C06 I
- Issued
- Jun 3, 2014
- Abate by
- Jul 21, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: A. On or about March 12, 2014, Company-Wide: The employer had not conducted annual reviews of their machine-specific energy control procedures.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H03 IV
- Issued
- Jun 3, 2014
- Abate by
- Sep 2, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(iv): The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information: A. On or about March 12, 2014, Company-Wide: The employer had not ensured that employees had been trained on the new label elements and new safety data sheet (SDS) format under the Globally Harmonzied System of Classification and Labeling of Chemicals prior to December 1, 2013.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Winslow Automatics, INC.
View Winslow Automatics, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339612533.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.