BOISE, ID —
OSHA Inspection: TACTICAL SOLUTIONS INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TACTICAL SOLUTIONS INC. in 2772 S VICTORY VIEW WAY, BOISE, ID 83709 (NAICS 926120). OSHA activity number 339616633.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TACTICAL SOLUTIONS INC.
- Site address
- 2772 S VICTORY VIEW WAY
- City
- BOISE
- State
- ID
- ZIP
- 83709
- Mailing
- 2772 S VICTORY VIEW WAY, BOISE, ID 83709
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 926120
- Employees
- 40
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.215 A02
- Issued
- Mar 11, 2014
- Abate by
- Apr 4, 2014
- Penalty
- Initial $2,380 · Current $1,666 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): The safety guard of abrasive wheel machinery did not cover the spindle end, nut, and flange projections. a) On or about March 7, 2014, in the workplace: An 8" abrasive wheel grinder, manufacturer unknown, model #2*-840, was missing a side guard to cover the spindle end and nut projection. b) On or about March 7, 2014, in the workplace: An 8" Delta abrasive wheel grinder, model # unknown, was missing a side guard to cover the spindle end and nut projection. c) On or about March 7, 2014, in the workplace: An 8" Central Machinery abrasive wheel grinder, model #39798, was missing a side guard to cover the spindle end and nut projection. d) On or about March 7, 2014, in the workplace: An 8" Central Machinery abrasive wheel grinder, model #39798, was missing a side guard to cover the spindle end and nut projection. Items c and d represent different abrasive grinders for items with illegible serial numbers. Abatement certification is required for this item.
Recent events (2)
- — I (S) $1666
- — Z (S) $2380
1910.215 A04
- Issued
- Mar 11, 2014
- Abate by
- Apr 4, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4) Work rests on abrasive wheel machinery were not kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. a) On or about March 7, 2014, in the workplace: An 8" abrasive wheel grinder, manufacturer unknown, model #2*-840, had a work rest adjusted one and one-eighth inch from the wheel. Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Mar 11, 2014
- Abate by
- Apr 4, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b)(3) and (4) of this section was exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top exceeded one-fourth inch. a) On or about March 7, 2014, in the workplace: An 8" abrasive wheel grinder, manufacturer unknown, model #2*-840, was missing a tongue guard. The distance from the wheel to the exterior guard was two inches. Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- Mar 11, 2014
- Abate by
- Apr 4, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not be developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in the activities covered by this section. a) On or about March 7, 2014, in the workplace: The employer did not document procedures for the control of hazardous energy. Employees were locking out CNC machines on a bi-annual basis to clean out residual metal waste. Equipment in the lockout program of the employer includes, but is not limited to: Okuma CNC Machines, Model Captain-L370; and a Lenos L300M CNC Machine. Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C06 I
- Issued
- Mar 11, 2014
- Abate by
- Apr 4, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. a) On or about March 7, 2014, in the workplace: The employer did not conduct annual inspections of the lockout programs in use. Equipment in the lockout program of the employer includes, but is not limited to: Okuma CNC Machines, Model Captain -L370; a Lenos L300M CNC Machine, and a horizontal band saw. Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Tactical Solutions INC.
View Tactical Solutions INC.'s full OSHA safety record →
More inspections in this industry (NAICS 926120)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339616633.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.