SYRACUSE, NY —
OSHA Inspection: CREATIVE LAMINATES INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CREATIVE LAMINATES INC. in 4003 EASTBOURNE DRIVE, SYRACUSE, NY 13206 (NAICS 321918). OSHA activity number 339623894.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CREATIVE LAMINATES INC.
- Site address
- 4003 EASTBOURNE DRIVE
- City
- SYRACUSE
- State
- NY
- ZIP
- 13206
- Mailing
- 4003 EASTBOURNE DRIVE, SYRACUSE, NY 13206
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 19
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.22 A01
- Issued
- May 2, 2014
- Abate by
- Jun 6, 2014
- Penalty
- Initial $1,020 · Current $714 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition: a) In the Shop, on or about 3/11/14: There was wood dust accumulation along horizontal surfaces including floors, ductwork, electrical conduit, panels, disconnects, outlets and PVC piping at the following areas: behind the router, southeast corner of shop, and main electrical service area. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $714
- — Z (S) $1020
1910.107 B02
- Issued
- May 2, 2014
- Abate by
- Jun 6, 2014
- Penalty
- Initial $1,360 · Current $952 Reduced
General-duty citation text
29 CFR 1910.107(b)(2): The interior surfaces of spray booths were not smooth and continuous without edges and otherwise designed to prevent pocketing of residues and facilitate cleaning and washing without injury: a) In the Shop, on or about 3/11/14: A wooden storage shelf with equipment was stored inside the booth. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $952
- — Z (S) $1360
1910.107 B05 I
- Issued
- May 2, 2014
- Abate by
- Jun 6, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(5)(i): Visible gauges, audible alarms, or pressure activated devices were not installed to indicate or insure that the required air velocity was maintained: a) In the Shop, on or about 3/11/14: There was no manometer or equivalent on the spray booth to insure that the required air velocity is maintained. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.107 B05 IV
- Issued
- May 2, 2014
- Abate by
- Jun 6, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(5)(iv): Space within the spray booth on the downstream and upstream sides of filters were not protected with approved automatic sprinklers: a) In the Shop, on or about 3/11/14: A spray booth used for spraying flammable stains and finishes was not provided with sprinklers on the downstream and upstream sides of the filters. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- May 2, 2014
- Abate by
- Jun 6, 2014
- Penalty
- Initial $1,020 · Current $714 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) At the establishment, on or about 3/11/14: There were no written machine specific lockout/tagout procedures for, including, but not limited to: the vacuum pump, glue line, edge bander when employees perform servicing and/or maintenance on this equipment to prevent the unexpected start up or release of stored energy of the equipment. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $714
- — Z (S) $1020
1910.157 G01
- Issued
- May 2, 2014
- Abate by
- Jun 6, 2014
- Penalty
- Initial $1,020 · Current $714 Reduced
General-duty citation text
29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting: a) At the establishment, on or about 3/11/14: Training was not provided to employees on the use of fire extinguishers and the hazards involved with incipient stage fire fighting. ABATEMENT NOTE: The employer must either correct the alleged violation or implement a Fire Safety Policy; as outlined in 29 CFR 1910.38 and 29 CFR 1910.39 which includes the evacuation requirements of 29 CFR 1910.157(b). Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $714
- — Z (S) $1020
1910.213 R04
- Issued
- May 2, 2014
- Abate by
- Jun 6, 2014
- Penalty
- Initial $1,700 · Current $1,190 Reduced
General-duty citation text
29 CFR 1910.213(r)(4): Suitable guard(s) were not provided to reduce to a minimum the hazard due to the point of operation of post form saw: a) In the Shop, on or about 3/11/14: Point of operation on a Midwest post form saw was not guarded. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $1190
- — Z (S) $1700
1910.178 L04 III
- Issued
- May 2, 2014
- Abate by
- Jun 6, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) At the establishment, on or about 3/11/14: An evaluation of each operator's performance on a Hyster 55 forklift was last done 12/8/10. Abatement certification must be submitted for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.242 B
- Issued
- May 2, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Glue Line Area, on or about 3/11/14: A compressed air gun measured >80 psi. Abatement certification must be submitted for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Creative Laminates INC.
View Creative Laminates INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339623894.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.