Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FELIPE DIAZ

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of FELIPE DIAZ in 5800 SILVERTON, MCKINNEY, TX 75070 (NAICS 238170). OSHA activity number 339626558.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Felipe Diaz — free Get an email when a new federal OSHA severe-injury report for Felipe Diaz is published. One employer, no account, unsubscribe in one click.
Establishment
FELIPE DIAZ
Site address
5800 SILVERTON
City
MCKINNEY
State
TX
ZIP
75070
Mailing
1314 WHITE OAK, GARLAND, TX 75040
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238170
Employees
3
Ownership type
A

4 citations on file for this inspection.

1926.25 A

Other-than-serious 1 instance 3 exposed
Issued
Mar 19, 2014
Abate by
Mar 31, 2014
Penalty
Initial $1,600 · Current $0 Reduced
29 CFR 1926.25(a): During the course of construction, form or scrap lumber with protruding nails was not kept clear from work areas:       This violation occurred on March 11, 2014, at a job site located at 5800 Silverton, McKinney, Texas; where employees were exposed to puncture wounds.
Recent events (2)
  • — I (O) $0
  • — Z (S) $1600

1926.100 A

Repeat Gravity 5 1 instance 1 exposed
Issued
Mar 19, 2014
Abate by
Mar 31, 2014
Penalty
Initial $3,520 · Current $1,056 Reduced
29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:     This violation occurred on March 11, 2014, at a work site located at 5800 Silverton, McKinney, Texas; employees performing decking work, were exposed to struck-by hazards from falling tools or materials and were not protected by the use of hard hat.      Felipe Diaz was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.100(a), which was contained in OSHA inspection number 748441, citation number 01, item number 001 and was affirmed as a final order on 02/14/2013, with respect to a workplace located at 665 Waterbrook Drive, Irving, Texas.
Recent events (2)
  • — I (R) $1056
  • — Z (R) $3520

1926.102 A01

Repeat Gravity 5 1 instance 3 exposed
Issued
Mar 19, 2014
Abate by
Mar 31, 2014
Penalty
Initial $3,520 · Current $1,056 Reduced
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury:      This violation occurred on March 11, 1014, at a work site located at 5800 Silverton, McKinney, Texas; employees using Hitachi Nail Guns and Makita circular saw for decking work was not protected from eye injuries by wearing safety glasses.          Felipe Diaz was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.102(a)(1), which was contained in OSHA inspection number 748441, citation number 01, item number 002 and was affirmed as a final order on 02/14/2013, with respect to a workplace located at 665 Waterbrook Drive, Irving, Texas.
Recent events (2)
  • — I (R) $1056
  • — Z (R) $3520

1926.501 B13

Repeat Gravity 10 1 instance 2 exposed
Issued
Mar 19, 2014
Abate by
Mar 31, 2014
Penalty
Initial $6,160 · Current $1,848 Reduced
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6-feet or more above lower levels was not protected by guardrail systems, safety net system, or personal fall arrest systems, nor was an alternative fall protection plan which meets the requirements of 1926.502(k) developed and implemented.     This violation occurred on March 11, 2014, at a work site located at 5800 Silverton, McKinney, Texas; at least two employees performing decking work from the roof, was not protected from falling more than 10-feet to the lower level by use of guardrail or personal fall arrest system.        Felipe Diaz was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 748441, citation number 01, item number 003 and was affirmed as a final order on 02/14/2013, with respect to a workplace located at 665 Waterbrook Drive, Irving, Texas.
Recent events (2)
  • — I (R) $1848
  • — Z (R) $6160

View Felipe Diaz's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339626558.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.