JOPLIN, MO —
OSHA Inspection: MID-AMERICA PRECISION PRODUCTS, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MID-AMERICA PRECISION PRODUCTS, LLC in 1927 W. 4TH STREET, JOPLIN, MO 64801 (NAICS 332322). OSHA activity number 339626830.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MID-AMERICA PRECISION PRODUCTS, LLC
- Site address
- 1927 W. 4TH STREET
- City
- JOPLIN
- State
- MO
- ZIP
- 64801
- Mailing
- 1927 W. 4TH STREET, JOPLIN, MO 64801
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 90
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.215 A04
- Issued
- Apr 16, 2014
- Abate by
- May 21, 2014
- Penalty
- Initial $2,380 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: (a) Machine Shop by Bridgeport Milling Machine: Employees were exposed to being caught in or struck by flying debris created by the Black and Decker 8 inch Heavy-Duty Bench Grinder which lacked two work rests.
Recent events (2)
- — I (S) $0
- — Z (S) $2380
1910.215 B09
- Issued
- Apr 16, 2014
- Abate by
- May 21, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Machine Shop by Bridgeport Milling Machine: Employees were exposed to being struck by flying debris created by the Black and Decker Bench Grinder which had both tongue guards adjusted at greater than one fourth inch.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B01 II
- Issued
- Apr 16, 2014
- Penalty
- Initial $2,380 · Current $1,666 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a) Tumble Deburr, Don's Machine Shop Building: Employees were exposed to electrical hazards as the junction box for the Sweco Tumbler had 3 knockouts open at the junction box. (b) Tumble Deburr, Don's Machine Shop Building: Employees were exposed to electrical hazards as the junction box by the drinking fountain had an open knockout.
Recent events (2)
- — I (O) $1666
- — Z (S) $2380
1910.305 G01 IV
- Issued
- Apr 16, 2014
- Abate by
- May 21, 2014
- Penalty
- Initial $2,380 · Current $1,666 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv): (a) Don's Machine Shop, Production Saw Area/Maintenance: Employees were exposed to electrical hazards as the electrical wiring for the Kalamazoo horizontal band saw was subject to abrasion as the cord was run through the ceiling.
Recent events (2)
- — I (O) $1666
- — Z (S) $2380
1910.305 G02 III
- Issued
- Apr 16, 2014
- Abate by
- May 21, 2014
- Penalty
- Initial $2,380 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: (a) Production Press Brake Area: Employees were exposed to electrical hazards as there was not adequate strain relief to the electrical wiring for the foot pedal for the Amada Promecam # 1 Press Brake. (b) Don's Machine Shop Building: Employees were exposed to electrical hazards as there was not adequate strain relief to the electrical wiring for the electrical cord at the plug-in end for the water heater by the drinking fountain.
Recent events (2)
- — I (S) $0
- — Z (S) $2380
More inspections at Mid-America Precision Products, LLC
View Mid-America Precision Products, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339626830.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.