CAPE GIRARDEAU, MO ·
OSHA Inspection: SIDES METAL PRODUCTS INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SIDES METAL PRODUCTS INC. in 80 N. BROADVIEW STREET, CAPE GIRARDEAU, MO 63701 (NAICS 423930). OSHA activity number 339627705.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SIDES METAL PRODUCTS INC.
- Site address
- 80 N. BROADVIEW STREET
- City
- CAPE GIRARDEAU
- State
- MO
- ZIP
- 63701
- Mailing
- 80 N. BROADVIEW STREET, CAPE GIRARDEAU, MO 63701
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- Employees
- 7
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.101 B
- Issued
- Mar 18, 2014
- Abate by
- Jul 10, 2015
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks was not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in Sec. 1910.6: a/ Adjacent to the main entrance, an oxygen cylinder was stored in an unsecured manner.
Recent events (3)
- · J (O) $0
- · C (S) $1200
- · Z (S) $1200
1910.253 B02 IV
- Issued
- Mar 18, 2014
- Abate by
- Jul 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(b)(2)(iv): Valve protection caps, where the cylinder is designed to accept a cap, was not always in place, hand-tight, except when cylinders are in use or connected for use. a/ Adjacent to the main entrance, an oxygen cylinder was stored without a valve protection cap in place.
Recent events (3)
- · J (O) $0
- · C (S) $0
- · Z (S) $0
1910.253 B04 III
- Issued
- Mar 18, 2014
- Abate by
- Jul 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour. a/ Adjacent to the main entrance, an oxygen cylinder and a propane cylinder were stored together.
Recent events (3)
- · J (O) $0
- · C (S) $0
- · Z (S) $0
1910.133 A01
- Issued
- Mar 18, 2014
- Abate by
- Jul 10, 2015
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a/ Recycling area, employees operating the Sorter and Can Densifier machines to crush and sort cans were not wearing eye protection.
Recent events (3)
- · J (S) $600
- · C (S) $1200
- · Z (S) $1200
1910.254 D09 III
- Issued
- Mar 18, 2014
- Abate by
- Jul 10, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.254(d)(9)(iii): Joining lengths of work and electrode cables by the use of connecting means did not have insulation adequate for the service conditions a/ In the welding area, the converter used with the MILLERMATIC 251 welder had exposed wiring on both ends.
Recent events (3)
- · J (S) $800
- · C (S) $1600
- · Z (S) $1600
1910.1200 E01
- Issued
- Mar 18, 2014
- Abate by
- Jul 10, 2015
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): Employers did not develop, implement, and maintain at each workplace, a written hazard communication program which at least described how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met: a/ At the shop, for employees who used chemicals, including but not limited to oxygen, propane, gasoline, kerosene, and aluminum, a hazard communication (global harmonization system) program had not been implemented, to include a written program, labeling, safety data sheets and training.
Recent events (3)
- · J (S) $600
- · C (S) $1200
- · Z (S) $1200
1910.1200 G01
- Issued
- Mar 18, 2014
- Abate by
- Jul 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical they used: a/ At the shop, for employees who used chemicals, including but not limited to oxygen, propane, gasoline, kerosene, and aluminum, safety data sheets were not available.
Recent events (3)
- · J (S) $0
- · C (S) $0
- · Z (S) $0
1910.1200 H01
- Issued
- Mar 18, 2014
- Abate by
- Jul 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employers did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area: a/ At the shop, for employees who used chemicals, including but not limited to oxygen, propane, gasoline, kerosene, and aluminum, global harmonization system (GHS) training on safety data sheets and the new labeling system had not been conducted.
Recent events (3)
- · J (S) $0
- · C (S) $0
- · Z (S) $0
1910.95 D01
- Issued
- Mar 18, 2014
- Abate by
- Jul 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.95(d)(1): When information indicates that any employee's exposure may equal or exceed an 8-hour time-weighted average of 85 decibels, the employer did not develop and implement a monitoring program: a/ For employees who operated the Sorter and Can Densifier machines approximately 1-4 hours daily, initial noise monitoring had not been conducted.
Recent events (3)
- · J (O) $0
- · C (O) $0
- · Z (O) $0
More inspections at Sides Metal Products INC.
View Sides Metal Products INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423930)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339627705.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.