Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: IMPORT AUTO TECHNICIANS

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of IMPORT AUTO TECHNICIANS in 2265 LA MONTANA WAY, COLORADO SPRINGS, CO 80918 (NAICS 441110). OSHA activity number 339628349.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Import Auto Technicians — free Get an email when a new federal OSHA severe-injury report for Import Auto Technicians is published. One employer, no account, unsubscribe in one click.
Site address
2265 LA MONTANA WAY
City
COLORADO SPRINGS
State
CO
ZIP
80918
Mailing
2265 LA MONTANA WAY, COLORADO SPRINGS, CO 80918
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
441110
Employees
6
Ownership type
A

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 6 instances 4 exposed
Issued
Apr 8, 2014
Abate by
Apr 14, 2014
Penalty
Initial $2,800 · Current $1,400 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crushing and struck-by hazards associated with improper automobile lift operations:       a) On or about March 12, 2014 and at times prior to that date, employees were exposed to crushing and struck-by hazards while working around automotive lifts as follows:          1. A vehicle lift that was not functioning properly was occasionally used by the employees.         2. Lifts were not provided with identification plates indicating their model and serial number.        3. Lifts were not provided with warning labels indicating their load limit and rated capacity.       Abatement note:     Feasible and acceptable methods to correct these hazardous conditions would be to follow the requirements in accordance to the instructions required in the ANSI/ALI ALOIM: 2008 Safety requirements for operation, inspection, and maintenance standard which includes but is not limited to the following:         1. Have the vehicle lift taken out of service and be repaired or replaced.          2. Provide the lifts with identification plates indicating their model and serial number.         3. Provide the lifts with warning labels indicating their load limits and rated capacity.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1910.37 B06

Serious Gravity 1 6 instances 9 exposed
Issued
Apr 8, 2014
Abate by
Apr 14, 2014
Penalty
Initial $1,200 · Current $600 Reduced
29 CFR 1910.37(b)(6): Each exit sign must be illuminated to a surface value of at least five foot-candles (54 lux) by a reliable light source and be distinctive in color. Self-luminous or electroluminescent signs that have a minimum luminance surface value of at least .06 foot-lamberts (0.21 cd/m2) are permitted.      a) On or about March 12, 2014 and at times prior, employees were exposed to entrapment because six exit signs would not be visible in the event of an emergency. The exit signs were not illuminated.
Recent events (2)
  • — I (S) $600
  • — Z (S) $1200

1910.215 A04

Serious Gravity 1 1 instance 2 exposed
Issued
Apr 8, 2014
Abate by
Apr 14, 2014
Penalty
Initial $1,200 · Current $600 Reduced
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:    a) On or about March 12, 2014 and at times prior, employees were exposed to serious injuries while using a bench grinder. The work rest of the bench grinder was not adjusted to one eight inch.
Recent events (2)
  • — I (S) $600
  • — Z (S) $1200

1910.305 J01 I

Serious Gravity 1 1 instance 2 exposed
Issued
Apr 8, 2014
Abate by
Apr 14, 2014
Penalty
Initial $1,200 · Current $600 Reduced
29 CFR 1910.305(j)(1)(i): Fixtures, lampholders, lamps, rosettes, and receptacles had live parts normally exposed to employee contact:      a) On or about March 12, 2014 and at times prior, employees were exposed to electric shock from an energized electrical outlet. The employees used the electrical outlet in the service bay area that was not provided with a faceplate cover.
Recent events (2)
  • — I (S) $600
  • — Z (S) $1200

1910.1200 F06

Serious Gravity 5 3 instances 3 exposed
Issued
Apr 8, 2014
Abate by
Apr 14, 2014
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier, signal word, hazard statement(s), pictogram(s), precautionary statement(s) and name, address, and telephone number of the chemical manufacturer, importer, or other responsible party.      a) On or about March 12, 2014 and at times prior, employees were exposed to serious injuries while using several chemicals contained inside the spray containers. The containers were not labeled, tagged, or marked with the product identifier, signal word, hazard statement, pictogram, precautionary statement, and name, address, and telephone number of the chemical manufacturer, importer, or other responsible party.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1910.1200 G08

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 8, 2014
Abate by
Apr 14, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8): The employer did not ensure that material safety data sheets were readily accessible to the employees in their work area during each work shift:   a) On or about March 12, 2014 and at times prior, employees were exposed to serious injuries while using a corrosive chemical in the wash bay area. The safety data sheet was not readily available to the employees.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Import Auto Technicians's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339628349.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.