Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,991Inspections Most recent open 2026-08-24 Last loaded 2026-08-27

OSHA Inspection: T & D TIMBER PRODUCTS

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of T & D TIMBER PRODUCTS in 26 POMERLEAU STREET, BIDDEFORD, ME 04005 (NAICS 321999). OSHA activity number 339630360.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch T & D Timber Products for free Get an email when a new federal OSHA severe-injury report for T & D Timber Products is published. One employer, no account, unsubscribe in one click.
Site address
26 POMERLEAU STREET
City
BIDDEFORD
State
ME
ZIP
04005
Mailing
26 POMERLEAU STREET, BIDDEFORD, ME 04005
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321999
Employees
15
Ownership type
Private (A)

8 citations on file for this inspection.

1910.36 D01

Other-than-serious 1 instance 5 exposed
Issued
Mar 18, 2014
Abate by
Mar 26, 2014
Penalty
Initial $1,600 · Current $0 Reduced
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge:     At the Facility - The exit door on the back side of the drilling station was locked, preventing employees from opening it from the inside.
Recent events (2)
  • · I (O) $0
  • · Z (S) $1600

1910.157 C04

Serious Gravity 5 1 instance 15 exposed
Issued
Mar 18, 2014
Abate by
Mar 26, 2014
Penalty
Initial $1,600 · Current $1,120 Reduced
29 CFR 1910.157(c)(4): Portable fire extinguishers were not maintained in a fully charged and operable condition and they were not kept in their designated place at all times except during use:     At the Facility - The portable fire extinguisher located on the back wall near the drilling station was not charged nor was it mounted.
Recent events (2)
  • · I (S) $1120
  • · Z (S) $1600

1910.157 E02

Serious Gravity 5 2 instances 15 exposed
Issued
Mar 18, 2014
Abate by
Mar 26, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly:   At the Facility - The employer did not visually inspect portable fire extinguishers on a monthly basis.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.219 D01

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 18, 2014
Abate by
Apr 4, 2014
Penalty
Initial $1,600 · Current $1,120 Reduced
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):     Outside - The drive belt/pulley assembly for the live deck was not guarded.
Recent events (2)
  • · I (S) $1120
  • · Z (S) $1600

1910.219 F03

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 18, 2014
Abate by
Apr 4, 2014
Penalty
Initial $1,600 · Current $0 Reduced
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed:     Outside - The chain and sprocket drive for the advancement of the live deck was not guarded.
Recent events (2)
  • · I (S) $0
  • · Z (S) $1600

1904.29 A

Other-than-serious 2 instances 15 exposed
Issued
Mar 18, 2014
Abate by
Mar 26, 2014
Penalty
Initial $0 · Current $0
29 CFR 1904.29(a): The employer did not use an OSHA 300, 301 and 300A Form or equivalent:  At the Facility - The employer did not maintain OSHA 300 logs.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.37 B06

Other-than-serious 5 instances 15 exposed
Issued
Mar 18, 2014
Abate by
Apr 4, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.37(b)(6): Each exit sign was not illuminated to a surface value of at least five foot-candles (54 lux) by a reliable light source and be distinctive in color:   At the Facility - The exit signs were not illuminated nor were they of a distinctive color.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.212 A01

Other-than-serious 1 instance 3 exposed
Issued
Mar 18, 2014
Abate by
Apr 4, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:   Production Area - Machine guarding was not provided to protect the operator from the rotating part of the drill.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339630360.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.