ELK GROVE VILLAGE, IL —
OSHA Inspection: G & M METAL & PARTS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of G & M METAL & PARTS, INC. in 1970 ESTES AVE, ELK GROVE VILLAGE, IL 60007 (NAICS 423510). OSHA activity number 339633208.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- G & M METAL & PARTS, INC.
- Site address
- 1970 ESTES AVE
- City
- ELK GROVE VILLAGE
- State
- IL
- ZIP
- 60007
- Mailing
- 1970 ESTES AVE, ELK GROVE VILLAGE, IL 60007
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423510
- Employees
- 16
- Ownership type
- A
Citations
11 citations on file for this inspection.
1910.110 F02 I
- Issued
- Apr 18, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $1,760 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.110(f)(2)(i): Liquefied petroleum gas (LPG) containers in storage were not located in an area that minimized exposure to excessive temperature rise, physical damage, or tampering from unauthorized persons: a) Warehouse Area- Liquefied petroleum gas (LPG) containers were stored next to the norhteast overhead door that could be subject to physical damage from forklift path of travel, and when stacking pallets nearby. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $1000
- — Z (S) $1760
1910.110 F04 I
- Issued
- Apr 18, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.110(f)(4)(i): The employer stored LP-Gas in quantity exceeding 300 pounds inside the building(approximately 2,550 cubic feet in vapor form) except as provided in subparagraph (5) of this paragraph: a) Warehouse Area- The employer stored (12) LP-Gas containers in a cage and above the cage in quantiities exceeding 300 pounds inside the building, at northeast area of the warehouse near the overhead door. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.157 G01
- Issued
- Apr 18, 2014
- Abate by
- May 16, 2014
- Penalty
- Initial $1,760 · Current $912 Reduced
General-duty citation text
29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting: a) The employer did not provide employees an educational program to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $912
- — Z (S) $1760
1910.176 C
- Issued
- Apr 18, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $1,760 · Current $800 Reduced
General-duty citation text
29 CFR 1910.176(c): Storage areas were not kept free from accumulation of materials that constitute hazards from tripping, fire, explosion, or pest harborage. Vegetation control will be exercised when necessary. a) Storage Area- The employer storage areas were not kept free from accumulation of combustible materials, such as cardboard boxes and wood pallets stored adjacent to the Plasma cutting equipment that constitute a fire hazard. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $800
- — Z (S) $1760
1910.178 P01
- Issued
- Apr 18, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $2,640 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck was not taken out of service until it has been restored to safe operating condition. a) Warehouse Area- The employer failed to ensure that all powered industrial trucks that were found to be in need of repair or were anyway unsafe were removed from service until they had been restored to safe operating condition. Employees were operating the two Komatsu 225 powered industrial trucks with burnt out rear brake lights, clutch and brake pedals with missing covers, inoperable rear backup amber lights, horn, and backup alarm. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $2000
- — Z (S) $2640
1910.178 Q07
- Issued
- Apr 18, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $2,640 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(q)(7): Powered industrial truck(s) which were used on a round-the-clock basis were not examined for defects after each shift: a) Warehouse Area- The employer failed to ensure that all powered industrial trucks which were used on a round -the- clock basis were examined before being placed in service for defects after each shift. Employees were operating the two Komatsu 225 powered industrial trucks that needed repair, were defective, and they were not safe, the truck(s) were not taken out of service until they had been restored to safe operating condition. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $2640
1904.40 A
- Issued
- Apr 18, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $440 · Current $0 Reduced
General-duty citation text
29 CFR 1904.40(a): The employer did not provide an authorized government representative the records within four business hours. a) On or about March 13, 2014, the employer failed to provide copies of the injury and illness records OSHA 300, 301 and 300A logs or equivalent forms to an authorized representative within four business hours of their request for the years 2009, 2010, 2011, 2012, 2013 and 2014. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $440
1904.32 B06
- Issued
- Apr 18, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $440 · Current $100 Reduced
General-duty citation text
29 CFR 1904.32(b)(6): The Summary of Work-Related Injuries and Illness (OSHA Form 300A or equivalent) for the previous year was not posted between February 1 and April 30. a) On or about March 13, 2014, the employer failed to post the OSHA 300A summary based on the information from the 2013 OSHA 300 log between February 1, 2014 to April 30, 2014. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $100
- — Z (O) $440
1910.37 B02
- Issued
- Apr 18, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit." a) Warehouse Area- The northwest exit door with the emergency exit panic bar did not have a clearly visible and marked sign reading "Exit". In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.37 B06
- Issued
- Apr 18, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(6): Each exit sign was not illuminated to a surface value of at least five foot-candles (54 lux) by a reliable light source and be distinctive in color: a) Warehouse Area, South Dock- The exit sign was not illuminated. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 C04
- Issued
- Apr 18, 2014
- Abate by
- May 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(4): Portable fire extinguishers were not maintained in a fully charged and operable condition: a) Warehouse Area- Portable fire extinguisher was not maintained in a fully charged and operable condition, and kept in its designated place by the dock door. The fire extinguisher had not been re-charged after being used during the fire on February 18, 2014. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at G & M Metal & Parts, INC.
View G & M Metal & Parts, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423510)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339633208.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.