SAINT CHARLES, MO —
OSHA Inspection: BIG ST. CHARLES MOTORSPORTS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of BIG ST. CHARLES MOTORSPORTS, LLC in 3830 WEST CLAY STREET, SAINT CHARLES, MO 63301 (NAICS 441228). OSHA activity number 339636557.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BIG ST. CHARLES MOTORSPORTS, LLC
- Site address
- 3830 WEST CLAY STREET
- City
- SAINT CHARLES
- State
- MO
- ZIP
- 63301
- Mailing
- 3830 WEST CLAY STREET, SAINT CHARLES, MO 63301
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 441228
- Employees
- 90
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.178 L02 II
- Issued
- Mar 31, 2014
- Abate by
- Apr 24, 2014
- Penalty
- Initial $4,900 · Current $3,430 Reduced
General-duty citation text
29 CFR 1910.178(l)(2)(ii): Training did not consist of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. On 3/13/2014, Big St. Charles Motorsports, located at 3830 West Clay Street, St. Charles, MO, did not provide training for each forklift operator consisting of a combination of formal instruction, practical training and evaluation of the operator's performance in the workplace. The employer did not have any documentation available to show their forklift operators had been trained.
Recent events (2)
- — I (S) $3430
- — Z (S) $4900
1910.178 P01
- Issued
- Mar 31, 2014
- Abate by
- Apr 24, 2014
- Penalty
- Initial $4,900 · Current $3,430 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): A powered industrial truck was found to be in need of repair, defective, or in any way unsafe. The truck was not taken out of service until it had been restored to safe operating condition. On 3/13/2014, employees working at Big St. Charles Motorsports located at 3830 West Clay Street, St. Charles, MO, were operating forklifts in need of repair, defective and unsafe. The forklifts were not taken out of service until they were restored to safe operating condition. The company utilizes the following forklifts during daily operations: 1. Clark forklift, SN GPX-230-0117-8530, had a defective/inoperable horn and was missing a rear light. 2. Mitsubishi, SN W4075, Forklifts had a defective/inoperable horn, broken rear light and broken fan near the operator.
Recent events (2)
- — I (S) $3430
- — Z (S) $4900
1910.178 Q07
- Issued
- Mar 31, 2014
- Abate by
- Apr 24, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service. Such examination was not made at least daily. Defects when found were not immediately reported and corrected. On 3/13/2014, employees working at Big St. Charles Motorsports located at 3830 West Clay Street, St. Charles, MO, were operating two forklifts which had not been examined before being placed into service. The forklifts were in need of repair, defective and unsafe. The following forklifts were not examined prior to being operated on site: 1. Clark forklift, SN GPX-230-0117-8530, had a defective/inoperable horn and was missing a rear light. 2. Mitsubishi, SN W4075, Forklifts had a defective/inoperable horn, broken rear light and broken fan near the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L06
- Issued
- Mar 31, 2014
- Abate by
- Apr 24, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): Certification. The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l). The certification did not include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation. On 3/13/2014, Big St. Charles Motorsports located at 3830 West Clay Street, St. Charles, MO, did not certify that each forklift operator has been trained and evaluated. The employer did not have a certification, which included the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 441228)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339636557.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.