Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WEBB-STILES OF ALABAMA, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of WEBB-STILES OF ALABAMA, INC. in 700 INDUSTRIAL PARKWAY, GADSDEN, AL 35903 (NAICS 333922). OSHA activity number 339638207.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Webb-Stiles of Alabama, INC. — free Get an email when a new federal OSHA severe-injury report for Webb-Stiles of Alabama, INC. is published. One employer, no account, unsubscribe in one click.
Site address
700 INDUSTRIAL PARKWAY
City
GADSDEN
State
AL
ZIP
35903
Mailing
P.O. BOX 2608, GADSDEN, AL 35903
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333922
Employees
36
Ownership type
A

4 citations on file for this inspection.

1910.151 C

Repeat Gravity 5 1 instance 3 exposed
Issued
Jun 17, 2014
Abate by
Jul 14, 2014
Penalty
Initial $7,920 · Current $5,148 Reduced
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    (a) On or about 03/19/2014 - Main Plant Forklift Charging Area, a Bradley Wall-Mounted Eyewash Station, Model S19-220, was incapable of adequate water pressure to continuously flush the eyes for the required 15 minutes due to inadequate water pressure.    Webb-Stiles of Alabama, Inc. dba Webb-Stiles Company was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.151(c), which was contained in OSHA inspection number 314955642, citation number 01, item number 004 and was affirmed as a final order on 5/11/2011, with respect to a workplace located at 700 Industrial Parkway, Gadsden, AL 35903.
Recent events (2)
  • — I (R) $5148
  • — Z (R) $7920

1910.212 A01

Repeat Gravity 5 1 instance 1 exposed
Issued
Jun 17, 2014
Penalty
Initial $9,900 · Current $6,435 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    (a) On or about 03/19/2014 - Punch & Shear Department, a Kling Brothers Engineering Works Ironworker, Serial #3251, was not guarded at the point of operation allowing a 5/8 inch gap between the bottom of the die and the punch plate base.      Webb-Stiles of Alabama, Inc. dba Webb-Stiles Company was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.212(a)(1) which was contained in OSHA inspection number 313941627, citation number 01, item number 003 and was affirmed as a final order on 01/06/2010, with respect to a workplace located at 675 Liverpool Drive, Valley City, Ohio 44280.
Recent events (2)
  • — I (R) $6435
  • — Z (R) $9900

1910.242 B

Repeat Gravity 5 1 instance 1 exposed
Issued
Jun 17, 2014
Abate by
Jun 27, 2014
Penalty
Initial $7,920 · Current $5,148 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:    (a) On or about 03/19/2014 - Machine Department, an employee was using an air hose set at approximately 76 pounds per square inch (p.s.i.) to blow off metal shavings from his work area near a Bridgeport Manual Milling Machine.    Webb-Stiles of Alabama, Inc. dba Webb-Stiles Company was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.242(b), which was contained in OSHA inspection number 313941627, citation number 01, item number 009 and was affirmed as a final order on 01/6/2010, with respect to a workplace located at 675 Liverpool Drive, Valley City, Ohio 44280.
Recent events (2)
  • — I (R) $5148
  • — Z (R) $7920

1910.179 G01 V

Other-than-serious 1 instance 1 exposed
Issued
Jun 17, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.179(g)(1)(v): Pendant control box(es) were not clearly marked for identification of functions:  (a) On or about 03/19/2014 -  Bay 4, four of six directional buttons on the electronic pendant of a 3-ton Louden Crane/R&M Hoist were missing or illegible.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Webb-Stiles of Alabama, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339638207.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.