Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,195,903Inspections Most recent open 2026-08-18 Last loaded 2026-08-21

OSHA Inspection: PENNSYLVANIA SINTERED METALS

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of PENNSYLVANIA SINTERED METALS in 2950 WHITTIMORE ROAD, EMPORIUM, PA 15834 (NAICS 332117). OSHA activity number 339642985.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Pennsylvania Sintered Metals for free Get an email when a new federal OSHA severe-injury report for Pennsylvania Sintered Metals is published. One employer, no account, unsubscribe in one click.
Site address
2950 WHITTIMORE ROAD
City
EMPORIUM
State
PA
ZIP
15834
Mailing
2950 WHITTIMORE ROAD, EMPORIUM, PA 15834
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332117
Employees
51
Ownership type
Private (A)

3 citations on file for this inspection.

1910.1000 A02

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 4, 2014
Abate by
Jun 12, 2014
Penalty
Initial $4,900 · Current $4,900

Hazardous substances 0560

29 CFR 1910.1000(a)(2): Employee(s) were exposed to an airborne concentration of Carbon Monoxide listed in Table Z-1 in excess of the 8 hour Time Weighted Average concentration of 50 parts per million:    a.)    Pennsylvania Sintered Metals dba PSM Brown Company, Inc., 2950 Whittimore Rd, Emporium, PA-Sinter metal oven area next to Endothermic Gas Generator (#21901G), on or about March 21, 2014, and times prior thereto:  A Company employee was exposed to Carbon Monoxide at a time weighted average (TWA) of 61 parts per million (ppm), which was approximately 1.2 times the Permissible Exposure Limit (PEL) of 50 ppm. The exposure level was derived from one sample collected over 239 minutes and assumed zero exposure for the remaining work shift.
Recent events (1)
  • · Z (S) $4900

1910.1000 E

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 4, 2014
Abate by
Jun 12, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 0560

29 CFR 1910.1000(e): Feasible administrative or engineering controls were not determined and implemented to achieve compliance with the limits prescribed in 29 CFR 1910.1000(a) through (d):    a.) Pennsylvania Sintered Metals dba PSM Brown Company, Inc., 2950 Whittimore Rd, Emporium, PA-Sinter metal oven area next to Endothermic Gas Generator (#21901G), on or about March 21, 2014, and times prior thereto:  A Company employee was exposed to Carbon Monoxide at a time weighted average (TWA) of 61 parts per million (ppm), which was approximately 1.2 times the Permissible Exposure Limit (PEL) of 50 ppm. The exposure level was derived from one sample collected over 239 minutes and assumed zero exposure for the remaining work shift.  Administrative or engineering controls were not in place to maintain employee carbon monoxide exposure levels below the PEL.
Recent events (1)
  • · Z (S) $0

1910.134 D01 III

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 4, 2014
Abate by
Jun 12, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 0560

29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminants chemical state and physical form:     a.)    Pennsylvania Sintered Metals dba PSM Brown Company, Inc., 2950 Whittimore Rd, Emporium, PA-Sinter metal oven area next to Endothermic Gas Generator (#21901G), on or about March 21, 2014, and times prior thereto:  A Company employee was exposed to Carbon Monoxide at a time weighted average (TWA) of 61 parts per million (ppm), which was approximately 1.2 times the Permissible Exposure Limit (PEL) of 50 ppm. The company had not previously conducted air monitoring to determine the Sintering furnace operators Carbon Monoxide exposure.
Recent events (1)
  • · Z (S) $0

View Pennsylvania Sintered Metals's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339642985.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.