MERRIMACK, NH —
OSHA Inspection: ACE WELDING CO., INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of ACE WELDING CO., INC. in 715 A DANIEL WEBSTER HWY, MERRIMACK, NH 03054 (NAICS 331210). OSHA activity number 339649766.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACE WELDING CO., INC.
- Site address
- 715 A DANIEL WEBSTER HWY
- City
- MERRIMACK
- State
- NH
- ZIP
- 03054
- Mailing
- 715 A DANIEL WEBSTER HWY, MERRIMACK, NH 03054
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331210
- Employees
- 24
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.134 E01
- Issued
- May 12, 2014
- Abate by
- Jun 14, 2014
- Penalty
- Initial $1,200 · Current $1,200
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: A medical evaluation to determine the ability of employees to use a respirator had not been provided to employees required to wear a respirator during welding in the Fabrication shop or when welding on various job sites.
Recent events (2)
- — I (S) $1200
- — Z (S) $1200
1910.134 F02
- Issued
- May 12, 2014
- Abate by
- Jun 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: Employees required to wear a respirator during welding in the Fabrication shop or when welding on various job sites had not been fit tested prior to initial use of the respirator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 G01 I A
- Issued
- May 12, 2014
- Abate by
- Jun 14, 2014
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function: Fabrication area - Employee wearing required use respirator during welding of stainless steel had facial hair that came between the sealing surface of the facepiece and the face.
Recent events (2)
- — I (S) $0
- — Z (S) $1200
1910.1026 D01
- Issued
- May 12, 2014
- Abate by
- Jun 14, 2014
- Penalty
- Initial $1,600 · Current $800 Reduced
0689
General-duty citation text
29 CFR 1910.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI): Welding shop - Employer did not perform an initial determination for hexavalent chromium for workers who perform welding on stainless steel.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
More inspections at ACE Welding CO., INC.
View ACE Welding CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331210)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339649766.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.