AUBURN, NY —
OSHA Inspection: DAIKIN APPLIED AMERICAS INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of DAIKIN APPLIED AMERICAS INC. in 4900 TECHNOLOGY PARK BLVD., AUBURN, NY 13021 (NAICS 333415). OSHA activity number 339650939.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DAIKIN APPLIED AMERICAS INC.
- Site address
- 4900 TECHNOLOGY PARK BLVD.
- City
- AUBURN
- State
- NY
- ZIP
- 13021
- Mailing
- 4900 TECHNOLOGY PARK BLVD., AUBURN, NY 13021
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333415
- Employees
- 325
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jul 1, 2014
- Abate by
- Aug 6, 2014
- Penalty
- Initial $5,000 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not utilized, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Metal Shop, on or about 4/3/14: A Specific procedure was not developed for employees who perform servicing and/or maintenance on various machinery or equipment including but not limited to: Salvagnini S4-2.
Recent events (2)
- — I (S) $3500
- — Z (S) $5000
1910.147 D04 I
- Issued
- Jul 1, 2014
- Abate by
- Aug 6, 2014
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a) Metal Shop, on or about 3/23/14: Maintenance employee did not apply any lockout devices to any of the isolating energy devices controlling the Salvagnini S4-2.
Recent events (2)
- — I (S) $0
- — Z (S) $5000
1910.147 E02 I
- Issued
- Jul 1, 2014
- Abate by
- Aug 6, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(e)(2)(i): Before lockout or tagout devices were removed and energy was restored to the machine or equipment, authorized employees did not ensure that all employees had been safely positioned or removed from the work area: a) Metal Shop, on or about 3/23/14: Employee was trouble shooting the Salvagnini S4-2 without any locks or tags in place and the employee was not safely positioned or removed from the work area.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- Jul 1, 2014
- Abate by
- Aug 6, 2014
- Penalty
- Initial $5,000 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: Please enter your variable information after this comment box. a) Throughout the facility, on or about 4/3/14: No periodic inspections were conducted of the energy control procedures to ensure that the procedures and requirements of the standard were being followed. Maintenance employees perform servicing and/or maintenance on various machinery or equipment including but not limited to: Salvagnini S4-2 and OMS Machine.
Recent events (2)
- — I (S) $3500
- — Z (S) $5000
1910.147 C07 I A
- Issued
- Jul 1, 2014
- Abate by
- Aug 6, 2014
- Penalty
- Initial $5,000 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A) Authorized employees did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: a) L821 Area, on or about 4/3/14: Retraining was not provided to an employee on the energy control procedure for employees who perform servicing and/or maintenance on various machinery or equipment including but not limited to: OMS Expander.
Recent events (2)
- — I (S) $3500
- — Z (S) $5000
1910.1026 D01
- Issued
- Jul 1, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1026(d)(1): Each employer shall determine the 8-hour time weighted average (TWA) exposure for each employee exposed to chromium (VI): a) Steel Shop, on or about 4/3/14: The exposure to chromium (VI) was not determined for employees conducting welding on Stainless Steel.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Daikin Applied Americas INC.
View Daikin Applied Americas INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333415)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339650939.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.