EAST MOLINE, IL —
OSHA Inspection: MCLAUGHLIN BODY COMPANY
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of MCLAUGHLIN BODY COMPANY in 1400 5TH ST., EAST MOLINE, IL 61244 (NAICS 332312). OSHA activity number 339653495.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MCLAUGHLIN BODY COMPANY
- Site address
- 1400 5TH ST.
- City
- EAST MOLINE
- State
- IL
- ZIP
- 61244
- Mailing
- 2430 RIVER DRIVE, MOLINE, IL 61265
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 90
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C07 I A
- Issued
- Aug 15, 2014
- Abate by
- Oct 2, 2014
- Penalty
- Initial $5,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: Employees performing slat changes and adjusting sheet metal in Department 39 were not trained to properly apply lockout devices or to ensure that alterative measures which provide effective protection were present prior to performing work within the laser enclosure.
Recent events (3)
- — F (S) $1500
- — C (S) $5000
- — Z (S) $5000
1910.147 D01
- Issued
- Aug 15, 2014
- Abate by
- Oct 2, 2014
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(1): The authorized employee did not have knowledge of the type and magnitude of the energy, the hazards of the energy to be controlled, and the method or means to control the energy before the authorized or affected employee turned off a machine or equipment. Employees performing servicing and maintenance tasks on the laser tables and dust collectors in Dept. 39, including but not limited to, cleaning lenses, aligning laser beams, table maintenance and slat changes did know have the knowledge of the types and magnitude of energy sources, the energy hazards and the means to control that energy prior to performing work within the machines.
Recent events (3)
- — F (S) $0
- — C (S) $5000
- — Z (S) $5000
1910.147 D02
- Issued
- Aug 15, 2014
- Abate by
- Oct 2, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(2): An orderly shutdown of machine or equipment was not utilized to avoid any additional or increased hazards to employees as a result of equipment stoppage: Employees performing servicing and maintenance tasks on the laser tables and dust collectors in Dept. 39, including but not limited to, cleaning lenses, aligning laser beams, table maintenance and slat changes did not perform an orderly shutdown prior to performing work within the machines.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 D03
- Issued
- Aug 15, 2014
- Abate by
- Oct 2, 2014
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment was not physically located and operated in such a manner as to isolate the machine or equipment from the energy source: Employees performing servicing and maintenance tasks on the laser tables and dust collectors in Dept. 39, including but not limited to, cleaning lenses, aligning laser beams, table maintenance and slat changes did locate and operate energy isolating devices prior to performing work within the machines.
Recent events (3)
- — F (S) $0
- — C (S) $5000
- — Z (S) $5000
1910.147 D04 I
- Issued
- Aug 15, 2014
- Abate by
- Oct 2, 2014
- Penalty
- Initial $0 · Current $1,500
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: Employees performing slat changes and adjusting sheet metal in Department 39 did not apply lockout devices or ensure that alternative measures which provide effective protection were present prior to performing work within the laser enclosure.
Recent events (3)
- — F (S) $1500
- — C (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Aug 15, 2014
- Penalty
- Initial $7,000 · Current $7,000
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Employees performing work and maintenance tasks on MAZAK Laser 687/681 were exposed to struck-by and physical injuries due to the following conditions: 1. The end of the fencing around the loading tables was missing and did not prevent employees from bodily entering during operation and to load sheet metal while the laser was in operation. 2. The gate installed at the loading table/traverser fence was not interlocked to prevent employees from opening the gate and bodily entering during operation.
Recent events (3)
- — F (S) $7000
- — C (S) $7000
- — Z (S) $7000
1910.219 C02 I
- Issued
- Aug 15, 2014
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: Employees performing service and maintenance tasks on the Torit Downflo dust collector were not protected from a rotating driveshaft because the guard had been removed thus exposing the rotating parts.
Recent events (3)
- — F (S) $5000
- — C (S) $5000
- — Z (S) $5000
More inspections at Mclaughlin Body Company
View Mclaughlin Body Company's full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339653495.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.