PORT WENTWORTH, GA ·
OSHA Inspection: GLOBAL ENTERPRISE WORLDWIDE
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GLOBAL ENTERPRISE WORLDWIDE in 202 OXNARD DR., PORT WENTWORTH, GA 31407 (NAICS 484220). OSHA activity number 339657207.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GLOBAL ENTERPRISE WORLDWIDE
- Site address
- 202 OXNARD DR.
- City
- PORT WENTWORTH
- State
- GA
- ZIP
- 31407
- Mailing
- 202 OXNARD DR., PORT WENTWORTH, GA 31407
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 484220
- Employees
- 3
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 15, 2014
- Abate by
- Aug 8, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) In the facility yard, on or about April 1, 2014 and at times prior to, an employee was operating a Genie Telehandler forklift without utilizing the manufacturer installed seat belt, resulting in a struck-by hazard.
Recent events (1)
- · Z (S) $2800
1910.178 A04
- Issued
- Jul 15, 2014
- Abate by
- Aug 8, 2014
- Penalty
- Initial $1,200 · Current $1,200
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: (a) In the facility yard, on or about April 1, 2014 and at times prior to, employees operated a Genie Telehandler forklift with an altered fork tine pin, resulting in a struck-by hazard.
Recent events (1)
- · Z (S) $1200
1910.178 L01 I
- Issued
- Jul 15, 2014
- Abate by
- Aug 8, 2014
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Throughout the facility yard, on or about April 1, 2014 and at times prior to, the employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely by training and evaluation, resulting in a struck-by hazard.
Recent events (1)
- · Z (S) $2000
1910.134 K06
- Issued
- Jul 15, 2014
- Abate by
- Aug 8, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer: (a) Throughout the facility yard, on or about April 1, 2014 and at times prior to, the employer did not provide basic advisory information contained in Appendix D to employees who used filtering facepiece respirators on a voluntary basis, resulting in a respiratory and dermal hazard.
Recent events (1)
- · Z (O) $0
More inspections in this industry (NAICS 484220)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339657207.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.