OSWEGO, NY ·
OSHA Inspection: CHAMPLAIN VALLEY SPECIALTY OF NY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CHAMPLAIN VALLEY SPECIALTY OF NY, INC. in 8033 STATE ROUTE 104, OSWEGO, NY 13126 (NAICS 311991). OSHA activity number 339660003.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CHAMPLAIN VALLEY SPECIALTY OF NY, INC.
- Site address
- 8033 STATE ROUTE 104
- City
- OSWEGO
- State
- NY
- ZIP
- 13126
- Mailing
- 8033 STATE ROUTE 104, OSWEGO, NY 13126
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311991
- Employees
- 110
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.23 C01
- Issued
- May 15, 2014
- Penalty
- Initial $3,060 · Current $2,142 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:Note: Toeboards are only required when persons can pass, there is moving equipment or there is equipment with which falling materials could create a hazard. a) Processing Room B, on or about 4/1/14: Open sided floor near the Newtec scale was not equipped with a standard railing in that the intermediate railing was missing.
Recent events (2)
- · I (S) $2142
- · Z (S) $3060
1910.151 C
- Issued
- May 15, 2014
- Penalty
- Initial $2,295 · Current $1,607 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) Pasteurizing Room, on or about 4/1/14: Employees who handle corrosive CIP cleaner were not provided with a suitable eye wash facility.
Recent events (2)
- · I (S) $1606.5
- · Z (S) $2295
1910.157 G02
- Issued
- May 15, 2014
- Penalty
- Initial $2,295 · Current $0 Reduced
General-duty citation text
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter; a) Champlain Valley Specialty of NY, Inc., on or about 4/3/14: Employees were not provided with training on the use and application of fire extinguishers upon initial employment and annually thereafter.
Recent events (2)
- · I (S) $0
- · Z (S) $2295
1910.212 A01
- Issued
- May 15, 2014
- Abate by
- Jun 9, 2014
- Penalty
- Initial $3,060 · Current $2,142 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Packaging Department, on or about 4/1/14: Tray conveyor under the metal detector was not equipped with guarding at the in-running nip points.
Recent events (2)
- · I (S) $2142
- · Z (S) $3060
1910.219 C02 I
- Issued
- May 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: a) Packaging Department, on or about 4/1/14: Rotating shaft on the #2 line conveyor was not provided with guarding.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.37 A03
- Issued
- May 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(a)(3): Stairs or a ramp were not provided where the exit route was not substantially level: a) Pre-Sort Department, on or about 4/1/14: Exit route to the outside was not substantially level.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Champlain Valley Specialty of NY, INC.
View Champlain Valley Specialty of NY, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 311991)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339660003.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.