Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WORLDWIDE INDUSTRIES CORP.

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of WORLDWIDE INDUSTRIES CORP. in 795 GREEN ST, BOONTON, NJ 07005 (NAICS 238990). OSHA activity number 339663957.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Worldwide Industries Corp. — free Get an email when a new federal OSHA severe-injury report for Worldwide Industries Corp. is published. One employer, no account, unsubscribe in one click.
Site address
795 GREEN ST
City
BOONTON
State
NJ
ZIP
07005
Mailing
470 MITCHELL HILL RD, BUTLER, PA 16003
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238990
Employees
2
Ownership type
A

8 citations on file for this inspection.

1910.134 C01

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 27, 2014
Abate by
Oct 1, 2014
Penalty
Initial $2,640 · Current $1,388 Reduced
29 CFR 1910.134(c)(1) as referenced by 29 CFR 1926.103: A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:     a) Worksite located at 795 Green St, Boonton, NJ    The employer did not implement the company's written respiratory protection programs for employees required to wear half mask, negative pressure respirators such as, but not limited to, 3M.  The employer did not provide medical evaluations, fit tests, and respirators were worn with facial hair.    Violation occurred on or about 04/02/14.
Recent events (2)
  • — I (S) $1388
  • — Z (S) $2640

1910.134 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 27, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.134(e)(1) as referenced by 29 CFR 1926.103: The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:   a) Worksite located at 795 Green St, Boonton, NJ  The employer did not provide a medical evaluation for employees required to wear respirators such as, but not limited to, 3M half mask, negative pressure respirators.  Violation occurred on or about 04/25/14.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 F02

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 27, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(2) as referenced by 29 CFR 1926.103: Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:  a) Worksite located at 795 Green St, Boonton, NJ  The employer did not provide fit tests to employees required to wear respirators such as, but not limited to, 3M half mask, negative pressure respirators.  Violation occurred on 04/02/14.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 G01 I A

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 27, 2014
Abate by
Jul 17, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function:  a) Worksite located at 795 Green St, Boonton, NJ  Employees who wore half mask respirators wore them with facial hair that interfered with the sealing surface of the face piece.  Violation observed on or about 04/02/14.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 I01 II

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jun 27, 2014
Abate by
Jul 24, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.134(i)(1)(ii): Breathing air did not meet requirements for Grade D breathing air as described in the ANSI/Compressed Gas Association Commodity Specification G-7.1-1989:  a) Worksite located at 795 Green St, Boonton, NJ  An employee using an Ingersoll Rand HP915WCU compressor for breathing air did not meet the requirements for Grade D breathing air.  Violation occurred on or about 04/02/14.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 I07

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jun 27, 2014
Abate by
Jul 24, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.134(i)(7) as referenced by 29 CFR 1926.103: Oil lubricated compressor(s) used to supply breathing air did not have a high-temperature or carbon monoxide alarm(s) or both:   a) Worksite located at 795 Green St, Boonton, NJ      The Ingersoll Rand HP915WCU compressor used for breathing air did not have a high temperature alarm and/or carbon monoxide alarm.  Violation observed on or about 04/02/14.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.52 D01

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 27, 2014
Abate by
Oct 1, 2014
Penalty
Initial $2,200 · Current $2,000 Reduced
29 CFR 1926.52(d)(1): In all cases where the sound levels exceeded the values shown in Table D-2 of 29 CFR 1926.52, a continuing, effective hearing conservation program was not administered:     a) Worksite located at 795 Green St, Boonton, NJ     An employee performing abrasive blasting was exposed to continuous noise levels at 786% of the permissible daily noise exposure (8 hour Time Weighted Average sound level of 90 dBA) which is 7.86 times the allowable exposure limit.  The action level (AL) is 85 dBA.  The equivalent sound level of the measured dose is 104.9 dBA.  Sampling was performed for 350 minutes on 04/12/14, with the unsampled portion of time considered to represent zero for the exposure calculation.     The employer did not conduct monitoring, provide audiograms or training.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $2200

1926.302 B10

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Jun 27, 2014
Abate by
Jul 17, 2014
Penalty
Initial $1,320 · Current $0 Reduced
29 CFR 1926.302(b)(10): Abrasive blast cleaning nozzles were not equipped with an operating valve which must be held open manually:  a) Worksite at 795 Green St, Boonton, NJ   The abrasive blast cleaning nozzle did not have an operating valve that must be held open manually.  In the event the employee dropped the nozzle, it would stay open with the blasting media striking the employee.   Violation observed on or about 04/12/14.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1320

View Worldwide Industries Corp.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339663957.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.