Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: NICOLAS ALBARRANS

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of NICOLAS ALBARRANS in 2020 RICHMOND, HOUSTON, TX 77037 (NAICS 238140). OSHA activity number 339665325.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Nicolas Albarrans — free Get an email when a new federal OSHA severe-injury report for Nicolas Albarrans is published. One employer, no account, unsubscribe in one click.
Establishment
NICOLAS ALBARRANS
Site address
2020 RICHMOND
City
HOUSTON
State
TX
ZIP
77037
Mailing
326 GULFBANK RD., HOUSTON, TX 77037
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
3
Ownership type
A

6 citations on file for this inspection.

1926.50 G

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 23, 2014
Abate by
Apr 29, 2014
Penalty
Initial $1,200 · Current $1,200
29 CFR 1926.50(g): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:  a)  At the worksite, where an eye wash was not available.  Employees were using corrosives such as, but not limited to, Holcim Type S Masonry Cement.
Recent events (1)
  • — Z (S) $1200

1926.51 F01

Serious Gravity 1 1 instance 2 exposed
Issued
Apr 23, 2014
Abate by
Apr 26, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.51(f)(1): The employer did not provide adequate washing facilities for employees engaged in the application of paints, coatings, herbicides, or insecticides, or in other operations where contaminants may be harmful to the employees.  Such facilities were not in near proximity to the worksite and was not equipped as to enable employees to remove such substances:  a)  At the worksite where the employer did not provide washing facilities with non-alkaline soap and hand towels for employees using Holcim Masonry Cement Type S a corrosive containing Portland Cement.
Recent events (1)
  • — Z (S) $0

1926.451 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 23, 2014
Abate by
Apr 25, 2014
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access:  a)  At the worksite where employees were workiing from a tubular welded scaffolding system that was not provided with ladders or other approved means of accessing platforms. Crossbraces were used as a means of access.
Recent events (1)
  • — Z (S) $1600

1926.451 F03

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 23, 2014
Abate by
Apr 25, 2014
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity:   a) At the worksite where inspections of the scaffolds were not performed by a competent person, in that the designated competent person did not know that tubular welded frame scaffolding over 10 feet in height must be equipped with guard rails on the ends of the frames.
Recent events (1)
  • — Z (S) $1600

1926.451 G04 I

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 23, 2014
Abate by
Apr 25, 2014
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms before being released for use by employees other than erection/dismantling crews:  a) At the worksite where a tubular welded scaffolding system had unprotected sides and ends due to the lack of guardrails.
Recent events (1)
  • — Z (S) $2800

1926.452 C02

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 23, 2014
Abate by
Apr 25, 2014
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.452(c)(2): Tubular welded frames and panels were not braced by cross, horizontal, or diagonal braces, or combination thereof, which would have secured vertical members together laterally:  a)  At the worksite where a tubular welded scaffolding system had frames that were not secured by diagonal braces.
Recent events (1)
  • — Z (S) $1600

View Nicolas Albarrans's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339665325.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.