Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,249Inspections Most recent open 2026-08-20 Last loaded 2026-08-24

OSHA Inspection: ALRO STEEL CORPORATION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ALRO STEEL CORPORATION in 10223 WOODBERRY RD., TAMPA, FL 33619 (NAICS 423510). OSHA activity number 339667040.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Alro Steel Corporation for free Get an email when a new federal OSHA severe-injury report for Alro Steel Corporation is published. One employer, no account, unsubscribe in one click.
Site address
10223 WOODBERRY RD.
City
TAMPA
State
FL
ZIP
33619
Mailing
10223 WOODBERRY RD., TAMPA, FL 33619
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423510
Employees
2250
Ownership type
Private (A)

3 citations on file for this inspection.

1910.23 E01

Serious Gravity 1 4 instances 3 exposed
Issued
Sep 3, 2014
Abate by
Sep 15, 2014
Penalty
Initial $3,000 · Current $1,800 Reduced
29 CFR 1910.23(e)(1): The railing did not have a vertical height of 42 inches nominal from upper surface of top rail to floor, platform, runway, or ramp level and the intermediate rail was not approximately halfway between the top rail and the floor, platform, runway, or ramp:  a) for the establishment doing business as Alro Metals Service Center located at 10223 Woodberry Rd. Tampa (FL) where a guard railing system designed by the employer for the Raymond Order Selector platform that had a top rail measuring 42.5" and a mid rail near the operations panel area measuring 18", as observed on or about April 8, 2014.   b)  for the establishment doing business as Alro Metals Service Center located at 10223 Woodberry Rd. Tampa (FL) where a guard railing system designed by the employer for the Raymond Order Selector platform section had top rails measuring 42.5" and a mid rail measuring 24.5", as observed on or about April 8, 2014.   c)  for the establishment doing business as Alro Metals Service Center located at 10223 Woodberry Rd. Tampa (FL) where a guard railing system designed by the employer for the Raymond Order Selector platform had top rails measuring 42.5" and a mid rail section measuring 30.75", as observed on or about April 8, 2014.   d)  for the establishment doing business as Alro Metals Service Center located at 10223 Woodberry Rd. Tampa (FL) where a guard railing system designed by the employer for the Raymond Order Selector platform section with missing mid rails, as observed on or about April 8, 2014.
Recent events (2)
  • · I (S) $1800
  • · Z (S) $3000

1910.132 F01 III

Other-than-serious 1 instance 1 exposed
Issued
Sep 3, 2014
Abate by
Sep 15, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.132(f)(1)(iii): Employee(s) required to use PPE by this section were not trained to know how to don, doff, adjust, and wear PPE:  a)  for the employer doing business as Alro Metals Service Center located at 10223 Woodberry Rd. Tampa (FL) where an order selecting employee that was required to utilize a fall arrest harness and lanyard while operating a Raymond Order Picker had attempted to don the harness incorrectly. The employee was observed stepping into the harness backward to where the D ring was in the front of their torso, on or about April 8, 2014.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.178 A04

Other-than-serious 2 instances 2 exposed
Issued
Sep 3, 2014
Abate by
Sep 18, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.178(a)(4): Modifications or additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:  (a) for the employer doing business as Alro Metals Service Center located at 10223 Woodberry Rd. Tampa (FL) where modifications were made to Raymond Order Selector, Model 560, Serial #:  560-08-A07237 by fabricating a metal guardrail system, as observed on or about April 8, 2014.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View Alro Steel Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339667040.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.