PORT ALLEN, LA —
OSHA Inspection: BATON ROUGE PRINTING COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BATON ROUGE PRINTING COMPANY, INC. in 1130 COMMERCIAL DRIVE, PORT ALLEN, LA 70767 (NAICS 323111). OSHA activity number 339667354.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BATON ROUGE PRINTING COMPANY, INC.
- Site address
- 1130 COMMERCIAL DRIVE
- City
- PORT ALLEN
- State
- LA
- ZIP
- 70767
- Mailing
- 1130 COMMERCIAL DRIVE, PORT ALLEN, LA 70767
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323111
- Employees
- 28
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.37 A03
- Issued
- Apr 16, 2014
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: On or about 4/4/2014, the employer allowed the route to the emergency exit located in the back of the shop to be obstructed by a wooden pallet.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.219 D01
- Issued
- Apr 16, 2014
- Abate by
- Apr 26, 2014
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about 4/4/2014, the employer allowed employee(s) to use the tabber machine located in the shop area, with an unguarded drive belt pulley.
Recent events (2)
- — I (S) $2100
- — Z (S) $3500
1910.219 E03 I
- Issued
- Apr 16, 2014
- Abate by
- Apr 26, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): On or about 4/4/2014, the employer allowed employee(s) to use the tabber machine located in the shop area, with an unguarded drive belt.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 H03
- Issued
- Apr 16, 2014
- Penalty
- Initial $1,785 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.303(h)(3): Work space about equipment. Sufficient space shall be provided and maintained about electric equipment to permit ready and safe operation and maintenance of such equipment. Where energized parts are exposed, the minimum clear work space may not be less than 1.98 m (6.5 ft) high (measured vertically from the floor or platform) or less than 914 mm (3.0 ft) wide (measured parallel to the equipment). The depth shall be as required in paragraph (h)(5)(i) of this section. In all cases, the work space shall be adequate to permit at least a 90-degree opening of doors or hinged panels: On or abour 4/4/2014, the employer did not ensure the space in front of the 110 volt electrical panel located behind the 92 EMC - monitor was not obstructed.
Recent events (2)
- — I (S) $1071
- — Z (S) $1785
1910.303 B02
- Issued
- Apr 16, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: On or about 4/4/2014, at various locations in the shop area, the employer allowed employees to use metal handy boxes and relocatable power taps. The metal handy boxes and relocatable power taps are not intended to be used in commercial work places.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Baton Rouge Printing Company, INC.
View Baton Rouge Printing Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 323111)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339667354.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.