Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: SAWCO LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SAWCO LLC in 736 OLD ROUTE 15, NEW COLUMBIA, PA 17856 (NAICS 337110). OSHA activity number 339668006.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Sawco LLC for free Get an email when a new federal OSHA severe-injury report for Sawco LLC is published. One employer, no account, unsubscribe in one click.
Establishment
SAWCO LLC
Site address
736 OLD ROUTE 15
City
NEW COLUMBIA
State
PA
ZIP
17856
Mailing
736 OLD ROUTE 15, NEW COLUMBIA, PA 17856
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Union (A)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
337110
Employees
20
Ownership type
Private (A)

5 citations on file for this inspection.

1910.147 C06 I

Serious Gravity 1 1 instance 1 exposed
Issued
May 20, 2014
Abate by
Jul 8, 2014
Penalty
Initial $1,020 · Current $765 Reduced
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  Production area: The employer did not conduct a periodic of the energy control procedure at least annually, on or about April 9, 2014.  Abatement Certification Required.
Recent events (2)
  • · I (S) $765
  • · Z (S) $1020

1910.147 C07 I

Serious Gravity 1 1 instance 3 exposed
Issued
May 20, 2014
Abate by
Jul 8, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees:  a) Production area/maintenance: The employer did not provide adequate training for authorized and affected employees, on or about April 9, 2014.  Abatement Certification Required.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.147 C08

Serious Gravity 1 1 instance 4 exposed
Issued
May 20, 2014
Abate by
Jul 8, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(8): Lockout or tagout was not performed only by the authorized employees who are performing the servicing or maintenance:  a) Production area/maintenance: Lockout or tagout was performed by the shop supervisor while the machine operators performed the maintenance or servicing of the equipment, on or about April 9, 2014.  Abatement Certification Required.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.213 C02

Serious Gravity 1 1 instance 1 exposed
Issued
May 20, 2014
Penalty
Initial $1,020 · Current $765 Reduced
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator:  a) Production area: The Martin T72 table saw was not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator, as observed on or about April 9, 2014.  Abatement Observed During Inspection.
Recent events (2)
  • · I (S) $765
  • · Z (S) $1020

1910.305 G01 IV A

Other-than-serious 1 instance 1 exposed
Issued
May 20, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  a) Production area: A light duty flexible cord was being used as a substitute for fixed wiring to a light fixture near the edge banding machine, as observed on or about April 9, 2014.  Abatement Observed During Inspection.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View Sawco LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339668006.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.