SHERWOOD, AR —
OSHA Inspection: VAN TASSEL PROCTOR
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VAN TASSEL PROCTOR in 8604 HWY 107, SHERWOOD, AR 72120 (NAICS 236220). OSHA activity number 339668063.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VAN TASSEL PROCTOR
- Site address
- 8604 HWY 107
- City
- SHERWOOD
- State
- AR
- ZIP
- 72120
- Mailing
- 5110 TALLEY ROAD, LITTLE ROCK, AR 72204
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 25
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.451 F03
- Issued
- May 21, 2014
- Abate by
- May 30, 2014
- Penalty
- Initial $3,080 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity: On or about April 9, 2014, and at times prior thereto, at the job site located at 8604 Highway 107, in Sherwood, Arkansas, where employees were constructing masonry block walls, the employees were working from welded tubular frame scaffolding that was missing toe boards, guard rails, and cross braces. The scaffold was partially dismantled and reassembled several times during the work shift, but was not inspected after each modification. The scaffold was missing cross braces, toe boards, and fall protection. These conditions exposed the employees to struck by hazards and to the hazard of falling approximately 13 feet to the ground below.
Recent events (3)
- — F (O) $1000
- — C (S) $3080
- — Z (S) $3080
1926.451 H02 II
- Issued
- May 21, 2014
- Abate by
- May 30, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(h)(2)(ii): A toeboard was not erected along the edge of platforms more than 10 feet (3.1 m) above lower levels for a distance sufficient to protect employees below: On or about April 9, 2014 and at times prior thereto, at the job site located at 8604 Highway 107 in Sherwood, Arkansas where employees were constructing masonry block walls, the employees were working from a two tier welded tubular frame scaffold that did not have toe boards, safety nets, or other means to protect employees working below from falling objects. These conditions exposed the employees to the hazard of being struck by falling objects.
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1926.452 C02
- Issued
- May 21, 2014
- Abate by
- May 30, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.452(c)(2): Tubular welded frames and panels were not braced by cross, horizontal, or diagonal braces, or combination thereof, which would have secured vertical members together laterally: On or about April 9, 2014, and at times prior thereto, at the job site located at 8604 Highway 107, in Sherwood, Arkansas, where employees were constructing masonry block walls, the employees were working from a two tier, welded tubular frame scaffold that was missing 22 cross braces on the interior side of the scaffold. These conditions exposed the employees to fall and struck by hazards in the event of a scaffold collapse.
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1926.451 G01
- Issued
- May 21, 2014
- Abate by
- May 30, 2014
- Penalty
- Initial $3,080 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level. On or about April 9, 2014 and at times prior thereto, at the job site located at 8604 Highway 107 in Sherwood, Arkansas, where employees were constructing masonry block walls, the employees were working from a welded tubular frame scaffold, without any form of fall protection. These conditions exposed the employees to the hazard of falling approximately 13 feet to the concrete floor below.
Recent events (3)
- — F (S) $2000
- — C (S) $3080
- — Z (S) $3080
More inspections at VAN Tassel Proctor
View VAN Tassel Proctor's full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339668063.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.