Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GC MASONRY, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GC MASONRY, INC. in 56 S. RIVERSIDE DR., ELGIN, IL 60120 (NAICS 238140). OSHA activity number 339669137.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch GC Masonry, INC. — free Get an email when a new federal OSHA severe-injury report for GC Masonry, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
GC MASONRY, INC.
Site address
56 S. RIVERSIDE DR.
City
ELGIN
State
IL
ZIP
60120
Mailing
860 TOLLGATE RD., ELGIN, IL 60123
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
3
Ownership type
A

4 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 10 1 instance 3 exposed
Issued
May 5, 2014
Abate by
Jun 30, 2014
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    On or about April 9, 2014, at the above addressed jobsite, an employee was operating a rough terrain fork truck without training or certification, exposing the employee to the hazards associated with operating a rough terrain fork truck.    Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1926.451 E01

Serious Gravity 5 1 instance 2 exposed
Issued
May 5, 2014
Abate by
May 15, 2014
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used:    On or about April 9, 2014, at the above addressed jobsite, employees were not provided with a safe means of access to a tubular welded frame scaffold, exposing employees to a fall of over thirteen (13) feet.     Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1926.451 G01

Serious Gravity 5 1 instance 2 exposed
Issued
May 5, 2014
Abate by
May 15, 2014
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level:    On or about April 9, 2014, at the above addressed jobsite, employees performing masonry operations from a temporary elevated work platform, thirteen (13) feet six (6) inches above the ground, were exposed to injuries from falls due to the lack of guardrails.    Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1926.602 C01 II

Serious Gravity 10 1 instance 3 exposed
Issued
May 5, 2014
Abate by
May 15, 2014
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1926.602(c)(1)(ii): Modifications or additions which affect the capacity or safe operation of the equipment were made without the manufacturer's written approval:    On or about April 9, 2014, at the above addressed jobsite, employees lifted limestone blocks using lifting straps placed around a single fork of a Pettibone Traverse Lift Model T-8044 when this practice is not recommended and/or approved by the manufacturer. The employees were thereby exposed to struck by and/or fall hazards due to failure of lifting components.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

View GC Masonry, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339669137.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.