Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: REFRIGIWEAR, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of REFRIGIWEAR, INC. in 54 BREAKSTONE DRIVE, DAHLONEGA, GA 30533 (NAICS 315228). OSHA activity number 339676264.

Watch Refrigiwear, INC. — free Get an email when a new federal OSHA severe-injury report for Refrigiwear, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
REFRIGIWEAR, INC.
Site address
54 BREAKSTONE DRIVE
City
DAHLONEGA
State
GA
ZIP
30533
Mailing
54 BREAKSTONE DRIVE, DAHLONEGA, GA 30533
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
315228
Employees
125
Ownership type
A

1 citation on file for this inspection.

1910.219 A03

Serious Gravity 5 8 instances 4 exposed
Issued
Abate by
Penalty
Initial $3443.00 · Current $2066.00 Reduced
29 CFR 1910.219(a)(3): The sides and face sections nip points of the drive belt(s) and pulley(s) of textile machinery were not guarded by a guard which extended at least six inches beyond the rim of the pulley on the in-running and off-running sides of the belt and at least two inches away from the rim and face of the pulley in all other directions:  a) Refrigiwear, Inc., Dahlonega, GA - In the prep area, the ingoing nip point on the top section of the drive belt and pulley of the Juki LH 1152-4 model #H01118 was not guarded, on or about 4/15/14.  b) Refrigiwear, Inc., Dahlonega, GA - In the prep area, the ingoing nip point on the top section of the drive belt and pulley of the Juki LH 1152-5 model #H01771 was not guarded, on or about 4/15/14.  c) Refrigiwear, Inc., Dahlonega, GA - In the prep area, the ingoing nip point on the top section of the drive belt and pulley of the Juki LH 1152-5 model #K01273 was not guarded, on or about 4/15/14.  d) Refrigiwear, Inc., Dahlonega, GA - In the prep area, the ingoing nip point on the top section of the drive belt and pulley of the Juki DDL 555-5 model #D96404 was not guarded, on or about 4/15/14.  e) Refrigiwear, Inc., Dahlonega, GA - In the prep area, the ingoing nip point on the top section of the drive belt and pulley of the Juki DLN 415-5 was not guarded, on or about 4/15/14.  f) Refrigiwear, Inc., Dahlonega, GA - In the prep area, the ingoing nip point on the top section of the drive belt and pulley of the Singer 211W151 model #WL789655 was not guarded, on or about 4/15/14.  g) Refrigiwear, Inc., Dahlonega, GA - In the prep area, the ingoing nip point on the top section of the drive belt and pulley of the Singer 212G140 model #PE47761 was not guarded, on or about 4/15/14.  h) Refrigiwear, Inc., Dahlonega, GA - In the prep area, the ingoing nip point on the top section of the drive belt and pulley of the Consew model #745R30 was not guarded, on or about 4/15/14.
Recent events (2)
  • — I (S) $2065.8
  • — Z (S) $3443

View REFRIGIWEAR, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339676264.