Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WILCO CARPENTRY, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of WILCO CARPENTRY, INC. in 290 LONGVIEW DR, ELGIN, IL 60124 (NAICS 238130). OSHA activity number 339678161.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Wilco Carpentry, INC. — free Get an email when a new federal OSHA severe-injury report for Wilco Carpentry, INC. is published. One employer, no account, unsubscribe in one click.
Site address
290 LONGVIEW DR
City
ELGIN
State
IL
ZIP
60124
Mailing
4608 KELLY RD, ISLAND LAKE, IL 60042
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

5 citations on file for this inspection.

1926.20 B02

Serious Gravity 1 1 instance 5 exposed
Issued
Apr 25, 2014
Abate by
May 7, 2014
Penalty
Initial $1,200 · Current $660 Reduced
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person:    On or about April 16, 2014, at the above addressed jobsite, employees were exposed to the hazards associated with construction work as the employer did not have a competent person conduct frequent and regular safety inspections.     Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $660
  • — Z (S) $1200

1926.416 E01

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 25, 2014
Abate by
May 7, 2014
Penalty
Initial $1,200 · Current $660 Reduced
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used:    On or about April 16, 2014, employees were using a hand-held circular saw with an electrical cord where the insulation was cracked and worn, exposing the conductors, exposing employees to the hazards associated with an electrical shock.     Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $660
  • — Z (S) $1200

1926.501 B13

Serious Gravity 10 1 instance 3 exposed
Issued
Apr 25, 2014
Abate by
May 7, 2014
Penalty
Initial $2,800 · Current $1,560 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):     On or about April 16, 2014, at the above addressed jobsite, employees performing carpentry operations on the second floor were exposed to a fall of twelve (12) feet three (3) inches above the ground due to a lack of fall protection.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $1560
  • — Z (S) $2800

1926.503 A01

Serious Gravity 1 1 instance 4 exposed
Issued
Apr 25, 2014
Abate by
May 21, 2014
Penalty
Initial $1,200 · Current $660 Reduced
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    On or about April 16, 2014, at the above addressed jobsite, employees were exposed to a fall while working on a residential property and were not provided with training to recognize and minimize the hazards associated with falls.      Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $660
  • — Z (S) $1200

1926.1052 C01 I

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 25, 2014
Abate by
May 7, 2014
Penalty
Initial $1,200 · Current $660 Reduced
29 CFR 1926.1052(c)(1)(i): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with at least one handrail:    On or about April 16, 2014, at the above addressed jobsite, the stairway to the second floor was not provided with handrails, thereby exposing employees to fall hazards.      Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $660
  • — Z (S) $1200

View Wilco Carpentry, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339678161.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.