Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BRYANT & FREY CONSTRUCTION CO., INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BRYANT & FREY CONSTRUCTION CO., INC. in INTERSECTION CR172 & FM1325, AUSTIN, TX 78728 (NAICS 238910). OSHA activity number 339710907.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bryant & Frey Construction CO., INC. — free Get an email when a new federal OSHA severe-injury report for Bryant & Frey Construction CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
INTERSECTION CR172 & FM1325
City
AUSTIN
State
TX
ZIP
78728
Mailing
2045 WASHINGTON LANE, WACO, TX 76708
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238910
Employees
3
Ownership type
A

4 citations on file for this inspection.

1926.1408 A01

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 4, 2014
Abate by
Aug 8, 2014
Penalty
Initial $4,900 · Current $2,940 Reduced
29 CFR 1926.1408(a)(1): The employer did not identify the work zone where crane/derrick operations would be conducted as either demarcating boundaries and prohibiting the operator from working past those boundaries, or defining the work zone as the area 360 degrees around the equipment up to the equipment's maximum working radius.  On 21 April 2014, and at times prior thereto, a rough terrain crane with a boom arm was allowed to operate near and under an energized power line, without either the work zone being established and defined, exposing the operator and co-workers nearby to an electrical hazard of approximately 25kV 3-phase voltage.
Recent events (2)
  • — I (S) $2940
  • — Z (S) $4900

1926.1408 A02

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 4, 2014
Abate by
Aug 8, 2014
Penalty
Initial $4,900 · Current $2,940 Reduced
29 CFR 1926.1408(a)(2): The equipment's maximum working radius could get closer than 20 feet to a power line and the employer did not meet the requirements in Option (1), Option (2), or Option (3) of this section.  On 21 April 2014, and at times prior thereto, a rough terrain crane with a boom arm was allowed to operate near and under an energized power line, exposing the operator and co-workers nearby to an electrical hazard of approximately 25 kV 3-phase. The employer did not have the line de-energized or grounded (Option 1); did not maintain a 20 foot clearance (Option 2); or follow the minimum clearance distance per Table A as at least 10 feet for 25 kV (Option 3).
Recent events (2)
  • — I (S) $2940
  • — Z (S) $4900

1926.1408 D01

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 4, 2014
Abate by
Aug 8, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.1408(d)(1): Part(s) of the equipment, load line, or load (including rigging and lifting accessories) were allowed below an energized power line when the exceptions to paragraph (d)(2) did not apply.  On or about 21 April 2014, and at times prior thereto, a rough terrain crane with a boom arm was allowed to operate under an energized power line within 10 feet, exposing the operator and co-workers nearby to an electrical hazard of approximately 25 kV 3-phase voltage.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1408 G01

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 4, 2014
Abate by
Aug 8, 2014
Penalty
Initial $4,900 · Current $2,940 Reduced
29 CFR 1926.1408(g)(1): The employer did not train each operator and crew member assigned to work with the equipment when operating near energized power lines.  On 21 April 2014, and at times prior thereto, a rough terrain crane with a boom arm was allowed to operate near and under an energized power line, without either the work zone being established and defined, the voltage in the line known, or contact with the utility, exposing the operator and co-workers nearby to an electrical hazard of approximately 25kV 3-phase voltage.
Recent events (2)
  • — I (S) $2940
  • — Z (S) $4900

View Bryant & Frey Construction CO., INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339710907.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.