FORT WORTH, TX —
OSHA Inspection: SUNSHINE CUSTOM CABINETS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SUNSHINE CUSTOM CABINETS, INC. in 5212 SAUNDERS ROAD, SUITE C, FORT WORTH, TX 76119 (NAICS 321918). OSHA activity number 339732703.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUNSHINE CUSTOM CABINETS, INC.
- Site address
- 5212 SAUNDERS ROAD, SUITE C
- City
- FORT WORTH
- State
- TX
- ZIP
- 76119
- Mailing
- 5212 SAUNDERS ROAD, SUITE C, FORT WORTH, TX 76119
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 12
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.133 A01
- Issued
- May 23, 2014
- Abate by
- Jun 23, 2014
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: On or about January 10, 2014, in the frame shop, an employee operating the Paslode nail gun, model T250S-F16, was not wearing eye protection and was exposed to the hazard of struck by flying particles.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.178 L01 I
- Issued
- May 23, 2014
- Abate by
- Jun 23, 2014
- Penalty
- Initial $2,400 · Current $1,440 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): On or about January 10, 2014, in the shipping department, the employees driving the TCM Pro-G-5000 pound forklift, were not trained, exposing employees to the hazard of being struck by the lift.
Recent events (2)
- — I (S) $1440
- — Z (S) $2400
1910.213 C01
- Issued
- May 23, 2014
- Abate by
- Jun 23, 2014
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: On or about January 10, 2014, in the frame department, at least one employee operating the Powermatic III Tablesaw, model 56, not equipped with a guard over the blade, was exposed to the hazard of being struck by the material.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.213 H01
- Issued
- May 23, 2014
- Abate by
- Jun 23, 2014
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material: On or about January 10, 2014, in the framing department, at least one employee operated the Delta production 12" Radial Arm Saw that was not equipped with a lower blade guard, exposing employees to the hazard of being struck by the material.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.213 H04
- Issued
- May 23, 2014
- Abate by
- Jun 23, 2014
- Penalty
- Initial $2,400 · Current $1,440 Reduced
General-duty citation text
29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator: On or about January 10, 2014, in the framing department, at least one employee operated a Delta 12" Radial Arm Saw that did not return to its normal position, exposing employees to the hazard of being struck by the lower blade.
Recent events (2)
- — I (S) $1440
- — Z (S) $2400
1910.303 G01 I
- Issued
- May 23, 2014
- Abate by
- Jun 23, 2014
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.303(g)(1)(i): Work space was less than 30 inches wide in front of electric equipment operating at 600 volts, nominal, or less: On or about January 10, 2014, in the production department, the electrical control panels blocked by a large clamp machine and a storage table did not have a 30 inch clearance.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.37 B02
- Issued
- May 23, 2014
- Abate by
- Jun 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": On or about January 10, 2014, an exit sign was not provided over the door leading to the outside of the building, exposing employees to the hazard of egress in case of fire.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Sunshine Custom Cabinets, INC.
View Sunshine Custom Cabinets, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339732703.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.