Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ACCURATE METAL FINISHING INC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ACCURATE METAL FINISHING INC in 414 SOUTH STREET, RANDOLPH, MA 02368 (NAICS 332813). OSHA activity number 339741001.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Accurate Metal Finishing INC — free Get an email when a new federal OSHA severe-injury report for Accurate Metal Finishing INC is published. One employer, no account, unsubscribe in one click.
Site address
414 SOUTH STREET
City
RANDOLPH
State
MA
ZIP
02368
Mailing
414 SOUTH STREET, RANDOLPH, MA 02368
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332813
Employees
20
Ownership type
A

4 citations on file for this inspection.

1910.23 A08

Serious Gravity 5 4 instances 8 exposed
Issued
Sep 22, 2014
Abate by
Nov 12, 2014
Penalty
Initial $1,360 · Current $952 Reduced
29 CFR 1910.23(a)(8): Every floor hole into which persons can accidentally walk were not guarded:  Establishment:  In the following areas there were floor hole into which employees could accidentally walk: a) Wastewater Treatment Room - there are a 12-inch by 12-inch hole as deep as 4 inches in the center of the room. b) Wastewater Treatment Room - there was a gap in the diamond plating on the floor that measured 10 inches by 2.25 inches. c) Polishing Room ICF Plating Line - there was an 11-inch by 6-inch hole in the grating near Tank #18 that contained nitric acid.  d) Polishing Room ICF Plating Line - there was an 11-inch by 6-inch hole in an adjacent section of grating also near Tank #18.
Recent events (2)
  • — I (S) $952
  • — Z (S) $1360

1910.132 D01

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 22, 2014
Abate by
Nov 12, 2014
Penalty
Initial $1,360 · Current $952 Reduced
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards were present, or were likely to be present, which necessitated the use of personal protective equipment:  Establishment:  Employer did not select, provide and require the use of adequate hand and arm protection for employees who perform plating on the Big Line Anodizing.
Recent events (2)
  • — I (S) $952
  • — Z (S) $1360

1910.176 C

Serious Gravity 5 1 instance 8 exposed
Issued
Sep 22, 2014
Abate by
Nov 12, 2014
Penalty
Initial $1,360 · Current $952 Reduced
29 CFR 1910.176(c): Storage areas were not kept free from accumulation of materials that constituted hazards from tripping, fire, explosion or pest harborage:  Wastewater Treatment Room:  Strong acids such as nitric acid that were stored in close proximity to strong alkalis such as sodium hydroxide which are incompatible.
Recent events (2)
  • — I (S) $952
  • — Z (S) $1360

1910.304 F01 IV

Serious Gravity 1 1 instance 4 exposed
Issued
Sep 22, 2014
Abate by
Nov 12, 2014
Penalty
Initial $1,020 · Current $714 Reduced
29 CFR 1910.304(f)(1)(iv): Overcurrent devices for circuits rated 600 volts, nominal, or less, were not readily accessible to each employee or authorized building management personnel:  Small Parts Line Station:  Disconnects for equipment such as the deionizing water system were blocked by a work station set up in front of various disconnect panels.
Recent events (2)
  • — I (S) $714
  • — Z (S) $1020

View Accurate Metal Finishing INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339741001.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.