HOLCOMBE, WI ·
OSHA Inspection: WALTERS BROTHERS LUMBER MANUFACTURING INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of WALTERS BROTHERS LUMBER MANUFACTURING INC. in 28157 WISCONSIN STATE HIGHWAY 27, HOLCOMBE, WI 54745 (NAICS 321113). OSHA activity number 339743528.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WALTERS BROTHERS LUMBER MANUFACTURING INC.
- Site address
- 28157 WISCONSIN STATE HIGHWAY 27
- City
- HOLCOMBE
- State
- WI
- ZIP
- 54745
- Mailing
- P.O. BOX 158, RADISSON, WI 54867
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 27
- Ownership type
- Private (A)
Citations
11 citations on file for this inspection.
1910.95 G05 II
- Issued
- Aug 21, 2014
- Abate by
- Nov 14, 2014
- Penalty
- Initial $2,100 · Current $1,575 Reduced
General-duty citation text
29 CFR 1910.95(g)(5)(ii): Where mobile test vans were used to meet the audiometric testing obligation, the employer did not obtain a valid baseline audiogram within 1 year of an employee's first exposure at or above the action level: (a) Throughout the facility; Temporary employee(s) employed one year or more had not received an audiogram within the first year of the employees noise exposure.
Recent events (2)
- · I (S) $1575
- · Z (S) $2100
1910.95 G06
- Issued
- Aug 21, 2014
- Abate by
- Nov 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.95(g)(6): At least annually after obtaining the baseline audiogram, the employer did not obtain a new audiogram for each employee exposed at or above an 8-hour time-weighted average of 85 decibels : (a) Throughout the facility; Audiograms were not completed at least annually with every employee exposed at or above the 8-hour time-weighted average of 85 decibels.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.95 G08 II B
- Issued
- Aug 21, 2014
- Abate by
- Oct 10, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.95(g)(8)(ii)(B): Standard Threshold Shift (STS) Follow-Up Procedures. The employer did not ensure, when a STS occurs, that employees already using hearing protectors are refitted and retrained in the use of hearing protection and provided with hearing protectors offering greater attenuation if necessary: (a) Throughout the facility; Employees that experienced a standard threshold shift were not refitted and retrained in the use of hearing protectors.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.95 K02
- Issued
- Aug 21, 2014
- Abate by
- Nov 14, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.95(k)(2): The training program was not repeated annually for each employee included in the hearing conservation program: (a) Throughout the facility; Training was not conducted annually for each employee included in the hearing conservation program.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.138 A
- Issued
- Aug 21, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $2,100 · Current $1,575 Reduced
General-duty citation text
29 CFR 1910.138(a): The employer did not select and require employees to use appropriate hand protection when employees hands were exposed to hazardous condition(s): (a) Throughout the facility; Employees required to change out LP tanks on the forklifts were not provided with necessary hand protection.
Recent events (2)
- · I (S) $1575
- · Z (S) $2100
1910.178 Q07
- Issued
- Aug 21, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: (a) Throughout the facility; Forklifts were not inspected daily to identify any potential deficiencies with the lift before being placed in service.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.212 A01
- Issued
- Aug 21, 2014
- Abate by
- Oct 10, 2014
- Penalty
- Initial $2,800 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Pallet Shop- Maintenance Room; The large lathe was operated without adequate rotating part and flying chip guarding. b) Pallet Shop- Maintenance Room; The small lathe was operated without adequate rotating part and flying chip guarding.
Recent events (2)
- · I (S) $2100
- · Z (S) $2800
1910.147 C06 I
- Issued
- Aug 21, 2014
- Abate by
- Oct 10, 2014
- Penalty
- Initial $140 · Current $105 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: (a) Throughout the facility; Periodic inspections of the energy control procedures were not conducted at least annually on equipment such as, but not limited to, the Double End Trim Saw, the Rottochopper, the Hazelthorn Gang Resaw, the Scragg Mill Cornell Gang Resaw, etc. Walters Brothers Lumber Manufacturing, Inc. was previously cited for a violation of this occupational safety and health standard (29 CFR 1910.147(c)(6)(i)) based on periodic inspections of energy control procedures not being performed at least annually, which was contained in inspection number 110279, citation number 1 item 1b and was affirmed as final order on March 08, 2012, with respect to their workplace located at 10489W Highway 27/70 in Radisson, WI.
Recent events (2)
- · I (R) $105
- · Z (R) $140
1910.178 L04 III
- Issued
- Aug 21, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $140 · Current $105 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: (a) Throughout the facility; A performance evaluation of each powered industrial truck operator was not conducted at least every three years. Walters Brothers Lumber Manufacturing, Inc. was previously cited for a violation of this occupational safety and health standard (29 CFR 1910.178(l)(4)(iii)) based on employees performance not being evaluated every three years on powered industrial vehicles, which was contained in inspection number 110279, citation number 2 item 1 and was affirmed as final order on March 08, 2012, with respect to their workplace located at 10489W Highway 27/70 in Radisson, WI.
Recent events (2)
- · I (R) $105
- · Z (R) $140
1904.10 A
- Issued
- Aug 21, 2014
- Abate by
- Sep 26, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.10(a): The employer did not record all cases on the OSHA 300 Log when an employee's hearing test (audiogram) revealed that the employee had experienced a work-related Standard Threshold Shift (STS) in hearing in one or both ears, and the employee's total hearing level is 25 decibels (dB) or more above audiometric zero (averaged at 2000, 3000, and 4000 Hz) in the same ear(s) as the STS: (a) Throughout the facility; Employees diagnosed with a standard threshold shift and a total hearing level 25 decibels (dB) or more above the audiometric zero were not recorded on the OSHA 300 Log.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.146 C02
- Issued
- Aug 21, 2014
- Abate by
- Sep 26, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(c)(2): The employer did not inform exposed employees, by posting danger signs or by any other equally effective means, of the existence and location of and the danger posed by the permit spaces: (a) Pallet Shop Dust Collector; The employer did not have a permit-required confined space sign posted to inform employees of the existence and entrance requirements posed by the permit space.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Walters Brothers Lumber Manufacturing INC.
View Walters Brothers Lumber Manufacturing INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339743528.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.