COLLEGE PARK, GA ·
OSHA Inspection: VELTER MARROQUIN LOPEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VELTER MARROQUIN LOPEZ in 3155 FONSECA PASS, COLLEGE PARK, GA 30349 (NAICS 238130). OSHA activity number 339754640.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VELTER MARROQUIN LOPEZ
- Site address
- 3155 FONSECA PASS
- City
- COLLEGE PARK
- State
- GA
- ZIP
- 30349
- Mailing
- 3217 BEECH DRIVE, DECATUR, GA 30032
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Jun 13, 2014
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.102(a)(1): 29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face: a) Roof of residence located at 3155 Fonseca Pass, College Park, Georgia. Employees using pneumatic nail guns were exposed to eye injuries from flying debris, as they were not wearing eye protection, safety glasses.
Recent events (1)
- · Z (S) $1600
1926.304 D
- Issued
- Jun 13, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.304(d): Each portable, power-driven circular saw withdrawn from the work did not automatically and instantly return the lower guard to the covering position of the saw. a) Front of residence located at 3155 Fonseca Pass, College Park, Georgia. An employee was exposed to amputation hazards as the guard for a circular saw, being used to cut roof truss supports, had been blocked in the open position by a piece of wood.
Recent events (1)
- · Z (S) $2800
1926.501 B13
- Issued
- Jun 13, 2014
- Abate by
- Jun 19, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system. a) Roof of residence located at 3155 Fonseca Pass, College Park, Georgia. Employees installing braces for roof trusses while working from an unprotected exterior top plate were exposed to fall hazards of approximately 19-feet 2-inches.
Recent events (1)
- · Z (S) $2800
1926.1053 B13
- Issued
- Jun 13, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder shall not be used as a step. a) First floor of residence located at 3155 Fonseca Pass, College Park, Georgia. Employees were exposed to fall hazards of approximately 6-feet while using the top and the top step of a self-supporting ladder as a means of mounting and dismounting an upper landing.
Recent events (1)
- · Z (S) $2800
More inspections in this industry (NAICS 238130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339754640.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.