PATERSON, NJ —
OSHA Inspection: ACCURATE BOX COMPANY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ACCURATE BOX COMPANY, INC. in 86 FIFTH AVE., PATERSON, NJ 07524 (NAICS 322212). OSHA activity number 339755910.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACCURATE BOX COMPANY, INC.
- Site address
- 86 FIFTH AVE.
- City
- PATERSON
- State
- NJ
- ZIP
- 07524
- Mailing
- 86 FIFTH AVE., PATERSON, NJ 07524
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322212
- Employees
- 200
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Nov 3, 2014
- Penalty
- Initial $6,930 · Current $6,930
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Production Area Die Cutter #6: Employees were exposed to potentially hazardous energy while entering a die cutting machine without utilizing the specific procedures for locking and tagging out sources of energy, on or about 05/06/2014.
Recent events (3)
- — J (S) $6930
- — C (S) $6930
- — Z (S) $6930
1910.147 C05 I
- Issued
- Nov 3, 2014
- Penalty
- Initial $6,930 · Current $6,930
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: a) Production Area Die Cutter #6: Employer did not provide locks, tags, wedges, key blocks, adapter pins, self locking fasteners, or other hardware to employees to properly isolate, secure, of blocking of machines or equipment from energy sources, on or about 05/06/2014.
Recent events (3)
- — J (S) $6930
- — C (S) $6930
- — Z (S) $6930
1910.147 C06 I
- Issued
- Nov 3, 2014
- Penalty
- Initial $6,930 · Current $6,930
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Production Area Die Cutter #6: Employer did not conduct a periodic inspection of the energy control procedures at least annually to ensure that procedures were being followed, on or about 5/06/2014.
Recent events (3)
- — J (S) $6930
- — C (S) $6930
- — Z (S) $6930
1910.333 B02 II B
- Issued
- Nov 3, 2014
- Penalty
- Initial $6,930 · Current $6,930
General-duty citation text
29 CFR 1910.333(b)(2)(ii)(B): Control circuit devices, such as push buttons, selector switches, and interlocks, were used as the sole means for deenergizing circuits and equipment: a) Production Area, Die Cutter #6: Employees were exposed to amputation and crushing hazards from potentially hazardous energy while entering a die cutting machine that the key switch on the operator's station was the only means of deenergizing circuits and other sources of energy, on or about 05/06/2014.
Recent events (3)
- — J (S) $6930
- — C (S) $6930
- — Z (S) $6930
1910.212 A01
- Issued
- Nov 3, 2014
- Penalty
- Initial $13,860 · Current $7,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Die Cutter #6, 86 Fifth Avenue, Paterson, NJ: Machine Guarding was not provided to protect the operator and other employees from the hazards created by the moving elevator, conveyor, and other moving parts, on or about 05/06/2014. Accurate Box Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.212(a)(1), which was contained in OSHA inspection number 312863152, citation number 01, item number 002 and was affirmed as a final order on 06/09/2010, and OSHA inspection number 312864903, citation number 01, item number 004 and was affirmed as a final order on 11/03/2010 with respect to a workplace located at 86 Fifth Avenue, Paterson, NJ.
Recent events (3)
- — J (R) $7000
- — C (R) $13860
- — Z (R) $13860
More inspections at Accurate BOX Company, INC.
View Accurate BOX Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 322212)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339755910.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.